Gabriel (Gabor) Nyeste was one of the leaders of the Scouts of the First Kitimat Troop (Boy Scouts). He moved to Kitimat to work on the Alcan project and left in the early 60s. He passed away in Kamloops in July 2020.
Custodial History
Donated by Gabriel Nyeste, Aug 6 1983.
Scope and Content
Kitimat City Centre Outdoor Rink, Feb 14, 1962, The Kitimat Advertiser clipping. "Fun in the Sun".
John Ware was a past employee of the Kitimat Town Planning Department (1957-1959). He was hired by Hollister Kent, Planning Director for Kitimat. During his two years here, Dr. ware designed the first Kitimat street signs, the Haisla Boulevard overpass, and the Hirsch Creek Park shelter centennial project (1858-1958). He was layed off when Alcan lost major Aluminum buyers and the town expansion halted, resulting in a cut back of Kirtimat employees. He then moved to the USA.
Custodial History
Donated by John Ware.
Scope and Content
Photographs of the Haisla Boulevard pedestrian walkway bridge. Photos include bridge before centre support was installed, and after.
Notes
Further info on the walkway bridge - the pedestrian overpass was designed by John Ware to carry people, heavy wet snow loads and walkway snow plow, with a large saftey factor. The central span was designed as the maximum length of concrete double 'Tee' beam that could be carried on an open flatbed railroad car through the Canadian Rocky Mountains. The pre-stressed central span was supported on each end by poured reinforced concrete cantilevers built clear of the multi-lane highway. Initial structural calculations were done out by the very capable Kitimat Town Engineer Graydon. His calculations were checked by Kitimat's consulting engineering firm in Vancouver. Ware's design and the engineer's calculations were then sent to a pre-stressed concrete manufacturer in Calgary. When the beam arrived it was properly installed between the two cantilevers, and metal handrails were added just before the winter snow arrived. The bridge was deseigned to self support without any needed centre support. However, when city officials saw the light looking long span walkway bridge they decided that it was too fragile and that a column must be placed at mid span to give it adequate support. This decision would result in a fatal vehicle accident, as wet snows caused a driver to lose control and crash into it.
John Ware was a past employee of the Kitimat Town Planning Department (1957-1959). He was hired by Hollister Kent, Planning Director for Kitimat. During his two years here, Dr. ware designed the first Kitimat street signs, the Haisla Boulevard overpass, and the Hirsch Creek Park shelter centennial project (1858-1958). He was layed off when Alcan lost major Aluminum buyers and the town expansion halted, resulting in a cut back of Kirtimat employees. He then moved to the USA.
Custodial History
Donated by John Ware.
Scope and Content
Photographs of the Haisla Boulevard pedestrian walkway bridge concept.
Preliminary sketch design for walkway bridge over 4 lane divided highway. Designed by Jack Ware in collaboration with:
Kitimat municipal structural engineer-Bryan Graydon
Kitimat municipal structural engineering consultants-Vancouver
Note
Center prestressed beam is supported by the cantilevered beams at each end
Prestressed beam was the longest beam that could be carried on a rail flatbed car across tocky mountains in 1958
Design of supports was simplified to round columns for ease of construction
Notes
Further info on the walkway bridge - the pedestrian overpass was designed by John Ware to carry people, heavy wet snow loads and walkway snow plow, with a large saftey factor. The central span was designed as the maximum length of concrete double 'Tee' beam that could be carried on an open flatbed railroad car through the Canadian Rocky Mountains. The pre-stressed central span was supported on each end by poured reinforced concrete cantilevers built clear of the multi-lane highway. Initial structural calculations were done out by the very capable Kitimat Town Engineer Graydon. His calculations were checked by Kitimat's consulting engineering firm in Vancouver. Ware's design and the engineer's calculations were then sent to a pre-stressed concrete manufacturer in Calgary. When the beam arrived it was properly installed between the two cantilevers, and metal handrails were added just before the winter snow arrived. The bridge was deseigned to self support without any needed centre support. However, when city officials saw the light looking long span walkway bridge they decided that it was too fragile and that a column must be placed at mid span to give it adequate support. This decision would result in a fatal vehicle accident, as wet snows caused a driver to lose control and crash into it.
2 scrapbooks containing newspaper clippings pertaining to Kitimat. First album has house and flower garden on cover and says Kitimat, 1956. Second has hibiscus on cover and is undated.
2 scrapbooks containing newspaper clippings pertaining to Kitimat. First album has house and flower garden on cover and says Kitimat, 1956. Second has hibiscus on cover and is undated.
Photographs consisting of images of men in Kitimat, water depth measuring stick, machinery, offices, buildings, Bank of Montreal, Boy Scouts camp, boy scouts flagpole, canoeing, boats, docks, Alcan construction, Delta King, trailers, Douglas Channel, Smeltersite, Smeltersite Project sign, Moore Creek falls, and Moore Creek bridge.
Photographs consisting of images of men in Kitimat, water depth measuring stick, machinery, offices, buildings, Bank of Montreal, Boy Scouts camp, boy scouts flagpole, canoeing, boats, docks, Alcan construction, Delta King, trailers, Douglas Channel, Smeltersite, Smeltersite Project sign, Moore Creek falls, and Moore Creek bridge.
Photograph of various singing, dancing, and instrumental performances on stage. Many phone booth photos with different people alternating the booth. A car wash, hair cutting, and a lunch table with kids are also included.
Photograph of various singing, dancing, and instrumental performances on stage. Many phone booth photos with different people alternating the booth. A car wash, hair cutting, and a lunch table with kids are also included.
The Aluminum City Telethon was started in 1980. The Kitimat Sports Association was approached by the board of directers of the Child Development Centre, and asked for their assistance in raising funds. The idea of a Telethon was agreed on and a committee was formed.
Each year the Telethon executive receives requests from the different non-profit organizations within our own community. They then decide on how to disburse the funds raised that year. after the letters of requests are reviewed and a brief presentation is made to the board of directors explaining how th money received will be spent.
Custodial History
Dorothy Cheyne
Scope and Content
Series consists of policies of Aluminum City Telethon. Title based on contents of series.
The Aluminum City Telethon was started in 1980. The Kitimat Sports Association was approached by the board of directers of the Child Development Centre, and asked for their assistance in raising funds. The idea of a Telethon was agreed on and a committee was formed.
Each year the Telethon executive receives requests from the different non-profit organizations within our own community. They then decide on how to disburse the funds raised that year. after the letters of requests are reviewed and a brief presentation is made to the board of directors explaining how th money received will be spent.
Custodial History
Dorothy Cheyne
Scope and Content
Series consists of General Meetings of Aluminum City Telethon. Title based on contents of series.
The Aluminum City Telethon was started in 1980. The Kitimat Sports Association was approached by the board of directers of the Child Development Centre, and asked for their assistance in raising funds. The idea of a Telethon was agreed on and a committee was formed.
Each year the Telethon executive receives requests from the different non-profit organizations within our own community. They then decide on how to disburse the funds raised that year. after the letters of requests are reviewed and a brief presentation is made to the board of directors explaining how th money received will be spent.
Custodial History
Dorothy Cheyne
Scope and Content
Series consists of Executive Meetings of Aluminum City Telethon. Title based on contents of series.
The Aluminum City Telethon was started in 1980. The Kitimat Sports Association was approached by the board of directers of the Child Development Centre, and asked for their assistance in raising funds. The idea of a Telethon was agreed on and a committee was formed.
Each year the Telethon executive receives requests from the different non-profit organizations within our own community. They then decide on how to disburse the funds raised that year. after the letters of requests are reviewed and a brief presentation is made to the board of directors explaining how th money received will be spent.
Custodial History
Dorothy Cheyne
Scope and Content
Series consists of Annual General Meetings of Aluminum City Telethon. Title based on contents of series.
The Aluminum City Telethon was started in 1980. The Kitimat Sports Association was approached by the board of directers of the Child Development Centre, and asked for their assistance in raising funds. The idea of a Telethon was agreed on and a committee was formed.
Each year the Telethon executive receives requests from the different non-profit organizations within our own community. They then decide on how to disburse the funds raised that year. after the letters of requests are reviewed and a brief presentation is made to the board of directors explaining how th money received will be spent.
Custodial History
Dorothy Cheyne
Scope and Content
Series consists of Notes of Aluminum City Telethon. Title based on contents of series.
The Aluminum City Telethon was started in 1980. The Kitimat Sports Association was approached by the board of directers of the Child Development Centre, and asked for their assistance in raising funds. The idea of a Telethon was agreed on and a committee was formed.
Each year the Telethon executive receives requests from the different non-profit organizations within our own community. They then decide on how to disburse the funds raised that year. after the letters of requests are reviewed and a brief presentation is made to the board of directors explaining how th money received will be spent.
Custodial History
Dorothy Cheyne
Scope and Content
Series consists of Press Releases of Aluminum City Telethon. Title based on contents of series.
The Aluminum City Telethon was started in 1980. The Kitimat Sports Association was approached by the board of directers of the Child Development Centre, and asked for their assistance in raising funds. The idea of a Telethon was agreed on and a committee was formed.
Each year the Telethon executive receives requests from the different non-profit organizations within our own community. They then decide on how to disburse the funds raised that year. after the letters of requests are reviewed and a brief presentation is made to the board of directors explaining how th money received will be spent.
Custodial History
Dorothy Cheyne
Scope and Content
Series consists of Posters of Aluminum City Telethon. Title based on contents of series.
