a) A black camera with dials, numbers, letters, and symbols. There are markings at the front "LEICAFLEX SL2 Leitz WETZLAR"
b) A black camera lens with numbers, letters, and 3 dials
c) A black camera lens hood that fits over the camera lens with buttons in order to attach it, there are numbers and letters printed on it. The cap fits over the hood and reads: "GERMANY LEITZ WETZLAR"
a) A black camera with dials, numbers, letters, and symbols. There are markings at the front "LEICAFLEX SL2 Leitz WETZLAR"
b) A black camera lens with numbers, letters, and 3 dials
c) A black camera lens hood that fits over the camera lens with buttons in order to attach it, there are numbers and letters printed on it. The cap fits over the hood and reads: "GERMANY LEITZ WETZLAR"
A small metal film container with a blue top and a white bottom. There are 6 small camera parts and two of them are still sealed with the brand name "ROWI"
A small metal film container with a blue top and a white bottom. There are 6 small camera parts and two of them are still sealed with the brand name "ROWI"
A view camera. At the back there is information about the camera XXX"EASTMAN VIEW CAMERA NO.33A MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y." Above it is a square cut out, most likely a view finder. At one side there is a metal dial to adjust the bellows lens. above it is a metal hand turnable screw. At the other side there is a small metal dial. At the front there is a wooden part that can be adjusted along with a piece of glass within a frame right beind it. XXXAt bottom there is a screw hole to put a tripod through it. And a hand turnable screw at side. Latch at top to allow bellows lens to extend.
A view camera. At the back there is information about the camera XXX"EASTMAN VIEW CAMERA NO.33A MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y." Above it is a square cut out, most likely a view finder. At one side there is a metal dial to adjust the bellows lens. above it is a metal hand turnable screw. At the other side there is a small metal dial. At the front there is a wooden part that can be adjusted along with a piece of glass within a frame right beind it. XXXAt bottom there is a screw hole to put a tripod through it. And a hand turnable screw at side. Latch at top to allow bellows lens to extend.
Around Vivitar camera lens, it has a black round frame with a grey glass lens. The markings on the frame read: "Vivitar 77mm Polarizing JAPAN" it is stored in a round clear plastic case .
Around Vivitar camera lens, it has a black round frame with a grey glass lens. The markings on the frame read: "Vivitar 77mm Polarizing JAPAN" it is stored in a round clear plastic case .
A leather camera case imitation leather with handles, long strap. Lined with reddish-brown felt. There is a metal "Nikon" logo on the front. The flap has a lock.
A leather camera case imitation leather with handles, long strap. Lined with reddish-brown felt. There is a metal "Nikon" logo on the front. The flap has a lock.
a) A black leather case for the video camera. It has an adjustable shoulder strap and a latch that you can lock, there is a key attached to the side of the strap with a black string. Inside the case is purple felt with elastic and leather straps along with a name tag.
b) A Carena Variogon Zoomex video camera. It has three dials at the front and a lever at the lens to zoom in. beneath the dials is a trigger to begin filming. Under the handle is a hole with screw ridges to attach a tripod to. At the top there is a dial and a view finder.
c) A black detachable eyecup
d) A Schneider Optik Kreuznach lens cap
a) A black leather case for the video camera. It has an adjustable shoulder strap and a latch that you can lock, there is a key attached to the side of the strap with a black string. Inside the case is purple felt with elastic and leather straps along with a name tag.
b) A Carena Variogon Zoomex video camera. It has three dials at the front and a lever at the lens to zoom in. beneath the dials is a trigger to begin filming. Under the handle is a hole with screw ridges to attach a tripod to. At the top there is a dial and a view finder.
c) A black detachable eyecup
d) A Schneider Optik Kreuznach lens cap
a) A leather hard shell camera case with a strap. There are snap buttons to close and open it. There is a hand turnable screw to securly hold the camera in the case.
b) An Agfa Flexilette camera. It has a dual lens with three dials, at the front with markings: "AGFA COLOR APOTAR 1: 2.8/45" Dial at top to change numbers in window with button there is a window and some dried glue around it, the viewfinder is possibly missing. There are two dials at the bottom. the sides have metal loops to hook a strap.
a) A leather hard shell camera case with a strap. There are snap buttons to close and open it. There is a hand turnable screw to securly hold the camera in the case.
b) An Agfa Flexilette camera. It has a dual lens with three dials, at the front with markings: "AGFA COLOR APOTAR 1: 2.8/45" Dial at top to change numbers in window with button there is a window and some dried glue around it, the viewfinder is possibly missing. There are two dials at the bottom. the sides have metal loops to hook a strap.
Physical Condition
Fair
Material
metal
plastic
glass
leather
Condition Remarks
The leather bag is bent at the front, the lens is dirty
The case is attached onto the camera case strap and can be removed
c) A leather hard shell camera flash case. There is a button to close and open it. "Agfa" is written at the front.
d) An Agfalux flash. "Agfa AGFALUX" is marked at the front: Inside there is a flash that can be rotated to form a flash bowl, with a wire beneath, and battery compartment. There is a dial at the back and an attachment at the bottom.
The case is attached onto the camera case strap and can be removed
c) A leather hard shell camera flash case. There is a button to close and open it. "Agfa" is written at the front.
d) An Agfalux flash. "Agfa AGFALUX" is marked at the front: Inside there is a flash that can be rotated to form a flash bowl, with a wire beneath, and battery compartment. There is a dial at the back and an attachment at the bottom.
a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a square metal label holder at the back, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-70mm lens. It is a long lens with numbers and three large dials to adjust focus and zoom.
c) A Vivitar 72mm SKYLIGHT lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black large lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside.
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap with a grey metal frame.
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a square metal label holder at the back, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-70mm lens. It is a long lens with numbers and three large dials to adjust focus and zoom.
c) A Vivitar 72mm SKYLIGHT lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black large lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside.
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap with a grey metal frame.
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a glass display at the back for the ASA/ISO, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-105mm lens. It is a long lens with numbers and two dials. the Lens can be extended. It has colored numbers at the side
c) A B+W 52 E lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black Nikon HK-11 lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside. it has black felt inside
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a glass display at the back for the ASA/ISO, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-105mm lens. It is a long lens with numbers and two dials. the Lens can be extended. It has colored numbers at the side
c) A B+W 52 E lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black Nikon HK-11 lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside. it has black felt inside
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap