a) A black camera with dials, numbers, letters, and symbols. There are markings at the front "LEICAFLEX SL2 Leitz WETZLAR"
b) A black camera lens with numbers, letters, and 3 dials
c) A black camera lens hood that fits over the camera lens with buttons in order to attach it, there are numbers and letters printed on it. The cap fits over the hood and reads: "GERMANY LEITZ WETZLAR"
a) A black camera with dials, numbers, letters, and symbols. There are markings at the front "LEICAFLEX SL2 Leitz WETZLAR"
b) A black camera lens with numbers, letters, and 3 dials
c) A black camera lens hood that fits over the camera lens with buttons in order to attach it, there are numbers and letters printed on it. The cap fits over the hood and reads: "GERMANY LEITZ WETZLAR"
a) A leather hard shell camera case with a strap. There are snap buttons to close and open it. There is a hand turnable screw to securly hold the camera in the case.
b) An Agfa Flexilette camera. It has a dual lens with three dials, at the front with markings: "AGFA COLOR APOTAR 1: 2.8/45" Dial at top to change numbers in window with button there is a window and some dried glue around it, the viewfinder is possibly missing. There are two dials at the bottom. the sides have metal loops to hook a strap.
a) A leather hard shell camera case with a strap. There are snap buttons to close and open it. There is a hand turnable screw to securly hold the camera in the case.
b) An Agfa Flexilette camera. It has a dual lens with three dials, at the front with markings: "AGFA COLOR APOTAR 1: 2.8/45" Dial at top to change numbers in window with button there is a window and some dried glue around it, the viewfinder is possibly missing. There are two dials at the bottom. the sides have metal loops to hook a strap.
Physical Condition
Fair
Material
metal
plastic
glass
leather
Condition Remarks
The leather bag is bent at the front, the lens is dirty
A white plastic ballpoint pen with a large purple feather at the end of the pen. In the middle of the pen there is a metal band and underneath there are markings that read: "MADE IN USA"
A white plastic ballpoint pen with a large purple feather at the end of the pen. In the middle of the pen there is a metal band and underneath there are markings that read: "MADE IN USA"
A metal and white plastic single pen holder. The shiny yellow metal base is in the shape of an octagon with a very intricate design, on top there is a white pen cap to insert the ballpoint pen.
A metal and white plastic single pen holder. The shiny yellow metal base is in the shape of an octagon with a very intricate design, on top there is a white pen cap to insert the ballpoint pen.
Two identical pens with the name and phone number of Drs. Gottschling & Stevenson's Dentist Office on the side. The body of the pen is a dark teal in colour; the text is white, the rubber grip is black, and all other parts are silver/grey. The clips of the pens are zigzag-shaped and end in a ball.
Two identical pens with the name and phone number of Drs. Gottschling & Stevenson's Dentist Office on the side. The body of the pen is a dark teal in colour; the text is white, the rubber grip is black, and all other parts are silver/grey. The clips of the pens are zigzag-shaped and end in a ball.
Pen with red body and gold text advertising Parrott & Braid Insurance Agencies in Kitimat. Includes address and phone number of the company. Eraser at end.
Pen with red body and gold text advertising Parrott & Braid Insurance Agencies in Kitimat. Includes address and phone number of the company. Eraser at end.
Small silver-coloured metal pen with "HILITE ELECTRIC SERVICE LTD. - Electronic Supplies - Appliances - Radio - Television - Phone 1500 - Kitimat, B.C." written on the body in red letters. Dark blue atom symbol above them.
Small silver-coloured metal pen with "HILITE ELECTRIC SERVICE LTD. - Electronic Supplies - Appliances - Radio - Television - Phone 1500 - Kitimat, B.C." written on the body in red letters. Dark blue atom symbol above them.
a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a square metal label holder at the back, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-70mm lens. It is a long lens with numbers and three large dials to adjust focus and zoom.
c) A Vivitar 72mm SKYLIGHT lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black large lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside.
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap with a grey metal frame.
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a square metal label holder at the back, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-70mm lens. It is a long lens with numbers and three large dials to adjust focus and zoom.
c) A Vivitar 72mm SKYLIGHT lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black large lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside.
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap with a grey metal frame.
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a glass display at the back for the ASA/ISO, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-105mm lens. It is a long lens with numbers and two dials. the Lens can be extended. It has colored numbers at the side
c) A B+W 52 E lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black Nikon HK-11 lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside. it has black felt inside
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a glass display at the back for the ASA/ISO, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-105mm lens. It is a long lens with numbers and two dials. the Lens can be extended. It has colored numbers at the side
c) A B+W 52 E lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black Nikon HK-11 lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside. it has black felt inside
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap
a) A Mamiya Professional Camera. It has no lens. The top has a glass view finder. One side has a dial, the other side has a lever with a dial, there is a chart with numbers above the dial. Underneath, has Mamiya branding and a hole with screw grooves to attach a tripod to it. The front has a hole to attach a lens or extension tube. The back can be detached or reattached with the two locks.
b) A Mamiya plastic back panel with "Mamiya" marked at the front.
c) A Mamiya lens cap it has ridges on the side with a "Mamiya" marking at the front
a) A Mamiya Professional Camera. It has no lens. The top has a glass view finder. One side has a dial, the other side has a lever with a dial, there is a chart with numbers above the dial. Underneath, has Mamiya branding and a hole with screw grooves to attach a tripod to it. The front has a hole to attach a lens or extension tube. The back can be detached or reattached with the two locks.
b) A Mamiya plastic back panel with "Mamiya" marked at the front.
c) A Mamiya lens cap it has ridges on the side with a "Mamiya" marking at the front
Front has 3 lenses with brand information "Marksman MADE IN CAMERA FOR BERNARD MARKS & CO." viewfinder, lever and dial at side. At top is a Leather strap, lever for "TIME (arrow) SNAP" and a viewfinder. The back can be opened to reveal the inside of the camera.
Front has 3 lenses with brand information "Marksman MADE IN CAMERA FOR BERNARD MARKS & CO." viewfinder, lever and dial at side. At top is a Leather strap, lever for "TIME (arrow) SNAP" and a viewfinder. The back can be opened to reveal the inside of the camera.