A black Vivitar camera flash. It is a large square flash with a yellowed plastic flash with a bulb inside. The front has a dial to turn the colors on the side corresponding to the chart on the hinge. the back has a switch and numbers behind the hinge. the bottom has an attachment to attach it onto a camera.
b) An extra attachment piece it has "Vivitar" at the top. the bottom has a metal piece attached with four small screws along with three metal electric pieces.
A black Vivitar camera flash. It is a large square flash with a yellowed plastic flash with a bulb inside. The front has a dial to turn the colors on the side corresponding to the chart on the hinge. the back has a switch and numbers behind the hinge. the bottom has an attachment to attach it onto a camera.
b) An extra attachment piece it has "Vivitar" at the top. the bottom has a metal piece attached with four small screws along with three metal electric pieces.
An orange Hoya camera filter. The markings on the side read: "HOYA 72 O(G) JAPAN" it is stored in a clear plastic Hoya case with a white plastic sheet inside. There is a factor guide at the back
An orange Hoya camera filter. The markings on the side read: "HOYA 72 O(G) JAPAN" it is stored in a clear plastic Hoya case with a white plastic sheet inside. There is a factor guide at the back
A Soligor 52 camera filter. The markings on the side read: "SOLIGOR 52 PL JAPAN" it is adjustable and the dial can be turned. it is stored in a clear soligor plastic case with a foam sheet inside.
A Soligor 52 camera filter. The markings on the side read: "SOLIGOR 52 PL JAPAN" it is adjustable and the dial can be turned. it is stored in a clear soligor plastic case with a foam sheet inside.
A round camera softening filter. The filter has thin clear target lines in the lens in order to soften the lines of the subject being photographed. The lens has a plastic frame with a tab and it has markings that read "LINHOF MUNCHEN 70" the filter is stored in a clear plastic bag which is placed in a flat box with a Linhof and Weichzeichner label.
A round camera softening filter. The filter has thin clear target lines in the lens in order to soften the lines of the subject being photographed. The lens has a plastic frame with a tab and it has markings that read "LINHOF MUNCHEN 70" the filter is stored in a clear plastic bag which is placed in a flat box with a Linhof and Weichzeichner label.
a) A sleek black plastic case with a red felt interior and three dividers.
b) A Prisma 72mm +1 focus filter it has a black metal frame with a clear lens.
c) A Prisma 72mm +2 focus filter it has a black metal frame with a clear lens.
d) A Prisma 72mm +4 focus filter it has a black metal frame with a clear lens.
a) A sleek black plastic case with a red felt interior and three dividers.
b) A Prisma 72mm +1 focus filter it has a black metal frame with a clear lens.
c) A Prisma 72mm +2 focus filter it has a black metal frame with a clear lens.
d) A Prisma 72mm +4 focus filter it has a black metal frame with a clear lens.
a) A black leather case for the video camera. It has an adjustable shoulder strap and a latch that you can lock, there is a key attached to the side of the strap with a black string. Inside the case is purple felt with elastic and leather straps along with a name tag.
b) A Carena Variogon Zoomex video camera. It has three dials at the front and a lever at the lens to zoom in. beneath the dials is a trigger to begin filming. Under the handle is a hole with screw ridges to attach a tripod to. At the top there is a dial and a view finder.
c) A black detachable eyecup
d) A Schneider Optik Kreuznach lens cap
a) A black leather case for the video camera. It has an adjustable shoulder strap and a latch that you can lock, there is a key attached to the side of the strap with a black string. Inside the case is purple felt with elastic and leather straps along with a name tag.
b) A Carena Variogon Zoomex video camera. It has three dials at the front and a lever at the lens to zoom in. beneath the dials is a trigger to begin filming. Under the handle is a hole with screw ridges to attach a tripod to. At the top there is a dial and a view finder.
c) A black detachable eyecup
d) A Schneider Optik Kreuznach lens cap
a) A black Mamiya No.2 82 mm extension tube. A large tube with ridges inside there is a dial at one end.
b) A black cap attached to one end of the tube, it has no brand but it is most likely Mamiya.
a) A black Mamiya No.2 82 mm extension tube. A large tube with ridges inside there is a dial at one end.
b) A black cap attached to one end of the tube, it has no brand but it is most likely Mamiya.
a) A styrofoam box for the Mamiya extension tube. It fits in a cardboard box sleeve with brand information.
b) A Mamiya No.1 45 mm extension tube with ridges inside. The side has brand information and a dial.
c) A lens cap meant for the Mamiya extension tube. It has grooves at the side as well as "Mamiya" marked at the front.
d) A lens cap it has no branding and has a circle pattern at the front.
e) An instruction manual for the Mamiya auto extension tube
a) A styrofoam box for the Mamiya extension tube. It fits in a cardboard box sleeve with brand information.
b) A Mamiya No.1 45 mm extension tube with ridges inside. The side has brand information and a dial.
c) A lens cap meant for the Mamiya extension tube. It has grooves at the side as well as "Mamiya" marked at the front.
d) A lens cap it has no branding and has a circle pattern at the front.
e) An instruction manual for the Mamiya auto extension tube
a) A Mamiya Professional Camera. It has no lens. The top has a glass view finder. One side has a dial, the other side has a lever with a dial, there is a chart with numbers above the dial. Underneath, has Mamiya branding and a hole with screw grooves to attach a tripod to it. The front has a hole to attach a lens or extension tube. The back can be detached or reattached with the two locks.
b) A Mamiya plastic back panel with "Mamiya" marked at the front.
c) A Mamiya lens cap it has ridges on the side with a "Mamiya" marking at the front
a) A Mamiya Professional Camera. It has no lens. The top has a glass view finder. One side has a dial, the other side has a lever with a dial, there is a chart with numbers above the dial. Underneath, has Mamiya branding and a hole with screw grooves to attach a tripod to it. The front has a hole to attach a lens or extension tube. The back can be detached or reattached with the two locks.
b) A Mamiya plastic back panel with "Mamiya" marked at the front.
c) A Mamiya lens cap it has ridges on the side with a "Mamiya" marking at the front
a) A Mamiya RB67 camera viewfinder prism. It has a small square viewfinder at the back and a sheet of glass at the bottom.
b) A detachable plastic Mamiya plate to cover the glass at the bottom.
c) A detachable rubber eyecup for the square viewfinder.
a) A Mamiya RB67 camera viewfinder prism. It has a small square viewfinder at the back and a sheet of glass at the bottom.
b) A detachable plastic Mamiya plate to cover the glass at the bottom.
c) A detachable rubber eyecup for the square viewfinder.
a) A black Leitz camera lens with two camera lenses. The front of the lens has markings that read: "LEITZ WETZLAR 2905125 ELMARIT - R 1 : 2 . 8 / 24" the sides have numbers.
b) A Leitz camera lens, the edges have four "LEITZ" markings.
c) A black camera lens with ridges at the side
a) A black Leitz camera lens with two camera lenses. The front of the lens has markings that read: "LEITZ WETZLAR 2905125 ELMARIT - R 1 : 2 . 8 / 24" the sides have numbers.
b) A Leitz camera lens, the edges have four "LEITZ" markings.
c) A black camera lens with ridges at the side
A Mamiya Bellows Lens. The bottom has two rods, one rod has numbers on the side and the other has grooves at the top. At either side is a metal dial to adjust the fabric accordion, the front of the accordion has a round metal frame and the back is a square metal frame.
A Mamiya Bellows Lens. The bottom has two rods, one rod has numbers on the side and the other has grooves at the top. At either side is a metal dial to adjust the fabric accordion, the front of the accordion has a round metal frame and the back is a square metal frame.
The envelope includes:
3 camera lens (Mamiya, 52mm, and Canon), a rubber piece, 2 metal tips with a plastic end (one looks like an aux cord), an eye cup, 2 electrical plugs, 2 electrical accessories, a metal dial, a glass dropper with red rubber holder, a cardboard cut out to help frame the picture when using a camera.
The use of most of the items in the bag are unidentified.
The envelope includes:
3 camera lens (Mamiya, 52mm, and Canon), a rubber piece, 2 metal tips with a plastic end (one looks like an aux cord), an eye cup, 2 electrical plugs, 2 electrical accessories, a metal dial, a glass dropper with red rubber holder, a cardboard cut out to help frame the picture when using a camera.
The use of most of the items in the bag are unidentified.
A metal "Metz" camera bracket. It has three screw holes on one end and a slit in the middle of the metal. it is missing a screw dial in the slit so it can attach to a camera. It is used to attach a camera onto the dial and to attach a flash on the end, then mounted onto a tripod.
A metal "Metz" camera bracket. It has three screw holes on one end and a slit in the middle of the metal. it is missing a screw dial in the slit so it can attach to a camera. It is used to attach a camera onto the dial and to attach a flash on the end, then mounted onto a tripod.
