A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath that reads "MAX PATZELT" there is a white label at the side with information "super rollex 56 x 72" at the top there is a lever and a switch with an arrow on it. at the right there is a handle to remove a metal sheet, beside it there are two buttons to open the film holder. Underneath there is a metal attachment at the bottom.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath that reads "MAX PATZELT" there is a white label at the side with information "super rollex 56 x 72" at the top there is a lever and a switch with an arrow on it. at the right there is a handle to remove a metal sheet, beside it there are two buttons to open the film holder. Underneath there is a metal attachment at the bottom.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the Film Holder and a black name tag underneath it, it reads "MAX PATZELT" there is a white label at the right side with information "super rollex 56 x 72" at the top there is a lever and two circular clear plastic pieces beside it. At the right there is a handle to remove a metal sheet. Underneath there is a dial to open the film holder.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the Film Holder and a black name tag underneath it, it reads "MAX PATZELT" there is a white label at the right side with information "super rollex 56 x 72" at the top there is a lever and two circular clear plastic pieces beside it. At the right there is a handle to remove a metal sheet. Underneath there is a dial to open the film holder.
A Black Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath it, it reads "MAX PATZELT" above the emblem is a white label sticker. At the top there is a lever and one circular clear plastic piece beside it. Underneath the lever is a switch with a red arrow pointing right. At the right there is a handle to remove a metal sheet. Underneath there is a metal attachment.
A Black Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath it, it reads "MAX PATZELT" above the emblem is a white label sticker. At the top there is a lever and one circular clear plastic piece beside it. Underneath the lever is a switch with a red arrow pointing right. At the right there is a handle to remove a metal sheet. Underneath there is a metal attachment.
Physical Condition
Poor
Material
metal
plastic
Condition Remarks
Dirty, ripped, scratched, there is a broken piece inside
A film holder from Lisco Cut. It has two dark sliders. There are markings on both sides of the film holder "5x7 LISCO CUT FILM HOLDER MADE IN U.S.A. PATENTS PENDING LISCO PRODUCTS CO. GLENDALE CALIF." "LISCO REGAL" as well as writing on white sticker paper "PORT 125"
A film holder from Lisco Cut. It has two dark sliders. There are markings on both sides of the film holder "5x7 LISCO CUT FILM HOLDER MADE IN U.S.A. PATENTS PENDING LISCO PRODUCTS CO. GLENDALE CALIF." "LISCO REGAL" as well as writing on white sticker paper "PORT 125"
A light brown Linhof film holder. There is a label on the side that reads "Super Rollex 56 x 72" and a red name tag at the bottom front that reads "MAX PATZELT" at the top front there is a switch with an arrow pointing at the left. At the top there is a lever and a clear plastic circle to show the numbers inside. At the bottom there is a clip to hold the information for some film in this case it is a Kodak EP 120. Plastic tab at side to remove metal sheet.
A light brown Linhof film holder. There is a label on the side that reads "Super Rollex 56 x 72" and a red name tag at the bottom front that reads "MAX PATZELT" at the top front there is a switch with an arrow pointing at the left. At the top there is a lever and a clear plastic circle to show the numbers inside. At the bottom there is a clip to hold the information for some film in this case it is a Kodak EP 120. Plastic tab at side to remove metal sheet.
Physical Condition
Poor
Material
metal
plastic
Condition Remarks
The emblem is missing and the plastic tab appears to be melted
Two copies of Mamiya 6x7 film backs. It has a lever at the top, metal window at the back and you can open it with the lever at the side and you can remove the metal sheet at the back.
Two copies of Mamiya 6x7 film backs. It has a lever at the top, metal window at the back and you can open it with the lever at the side and you can remove the metal sheet at the back.
A postcard with a picture of Alcan's new office building. There is blank space on the back to place a stamp, there is also markings on the back that read "Alcan Kitimat Works New Office Building Completed June 1963 Compliments of the Aluminum Company of Canada, Limited"
A postcard with a picture of Alcan's new office building. There is blank space on the back to place a stamp, there is also markings on the back that read "Alcan Kitimat Works New Office Building Completed June 1963 Compliments of the Aluminum Company of Canada, Limited"
Physical Condition
Fair
Material
paper
Condition Remarks
Slightly sundamaged, bend marks on bottom left corner of picture
2 copies of a Beck's Books bookmark that with an illustration of a forest of trees. There is an elderly woman at the bottom right corner peeking through some trees and a book on the ground.
2 copies of a Beck's Books bookmark that with an illustration of a forest of trees. There is an elderly woman at the bottom right corner peeking through some trees and a book on the ground.
2 copies of a Beck's Books bookmark that with an illustration of a woman laying under a tree reading a book. There is a small elf at the top sitting on one of the branches. the book store's address is at the bottom.
2 copies of a Beck's Books bookmark that with an illustration of a woman laying under a tree reading a book. There is a small elf at the top sitting on one of the branches. the book store's address is at the bottom.
2 copies of a Beck's Books bookmark that with an illustration of a knight riding a horse holding a lance. There is a castle on top of a hill in the background.
2 copies of a Beck's Books bookmark that with an illustration of a knight riding a horse holding a lance. There is a castle on top of a hill in the background.
A Mayima flash bracket, there is a metal dial at the top with a screw bottom. There is a button at the bottom of the grip to control a piece at the top. There is a strap by the grip. Lastly there is a metal piece underneath the bottom to attach it to something.
A Mayima flash bracket, there is a metal dial at the top with a screw bottom. There is a button at the bottom of the grip to control a piece at the top. There is a strap by the grip. Lastly there is a metal piece underneath the bottom to attach it to something.
Around Vivitar camera lens, it has a black round frame with a grey glass lens. The markings on the frame read: "Vivitar 77mm Polarizing JAPAN" it is stored in a round clear plastic case .
Around Vivitar camera lens, it has a black round frame with a grey glass lens. The markings on the frame read: "Vivitar 77mm Polarizing JAPAN" it is stored in a round clear plastic case .
a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
A light meter with a white plastic bulb at the top and a dial at the bottom with numbers, it is stored in a leather case with a purple fabric inside. There are two dials stored in the zipper one white and one black.
A light meter with a white plastic bulb at the top and a dial at the bottom with numbers, it is stored in a leather case with a purple fabric inside. There are two dials stored in the zipper one white and one black.