a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a square metal label holder at the back, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-70mm lens. It is a long lens with numbers and three large dials to adjust focus and zoom.
c) A Vivitar 72mm SKYLIGHT lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black large lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside.
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap with a grey metal frame.
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a square metal label holder at the back, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-70mm lens. It is a long lens with numbers and three large dials to adjust focus and zoom.
c) A Vivitar 72mm SKYLIGHT lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black large lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside.
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap with a grey metal frame.
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a glass display at the back for the ASA/ISO, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-105mm lens. It is a long lens with numbers and two dials. the Lens can be extended. It has colored numbers at the side
c) A B+W 52 E lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black Nikon HK-11 lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside. it has black felt inside
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a glass display at the back for the ASA/ISO, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-105mm lens. It is a long lens with numbers and two dials. the Lens can be extended. It has colored numbers at the side
c) A B+W 52 E lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black Nikon HK-11 lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside. it has black felt inside
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap
a) A Mamiya Professional Camera. It has no lens. The top has a glass view finder. One side has a dial, the other side has a lever with a dial, there is a chart with numbers above the dial. Underneath, has Mamiya branding and a hole with screw grooves to attach a tripod to it. The front has a hole to attach a lens or extension tube. The back can be detached or reattached with the two locks.
b) A Mamiya plastic back panel with "Mamiya" marked at the front.
c) A Mamiya lens cap it has ridges on the side with a "Mamiya" marking at the front
a) A Mamiya Professional Camera. It has no lens. The top has a glass view finder. One side has a dial, the other side has a lever with a dial, there is a chart with numbers above the dial. Underneath, has Mamiya branding and a hole with screw grooves to attach a tripod to it. The front has a hole to attach a lens or extension tube. The back can be detached or reattached with the two locks.
b) A Mamiya plastic back panel with "Mamiya" marked at the front.
c) A Mamiya lens cap it has ridges on the side with a "Mamiya" marking at the front
Front has 3 lenses with brand information "Marksman MADE IN CAMERA FOR BERNARD MARKS & CO." viewfinder, lever and dial at side. At top is a Leather strap, lever for "TIME (arrow) SNAP" and a viewfinder. The back can be opened to reveal the inside of the camera.
Front has 3 lenses with brand information "Marksman MADE IN CAMERA FOR BERNARD MARKS & CO." viewfinder, lever and dial at side. At top is a Leather strap, lever for "TIME (arrow) SNAP" and a viewfinder. The back can be opened to reveal the inside of the camera.
a) A dark brown Zeiss Ikon camera case. The camera case can come apart and be reatached. The bottom has a hand turnable screw to snugly attach a camera onto it.
b) A Zeiss Ikon camera. At the front there is a lens, markings read "Carl Zeiss 2,8/50 3458458" "Contaflex SYNCHRO-COMPUR" there are three dials and a flash. Two dials at the top with numbers. The back has a view finder and film compartment. The bottom has two hand turnable screws and a screw hole for a tripod. At either side there is a metal loop for a camera strap.
c) A rubber Zeiss Ikon rubber lens hood the sides have markings "1109 S27 Zeis Ikon AG Germany"
a) A dark brown Zeiss Ikon camera case. The camera case can come apart and be reatached. The bottom has a hand turnable screw to snugly attach a camera onto it.
b) A Zeiss Ikon camera. At the front there is a lens, markings read "Carl Zeiss 2,8/50 3458458" "Contaflex SYNCHRO-COMPUR" there are three dials and a flash. Two dials at the top with numbers. The back has a view finder and film compartment. The bottom has two hand turnable screws and a screw hole for a tripod. At either side there is a metal loop for a camera strap.
c) A rubber Zeiss Ikon rubber lens hood the sides have markings "1109 S27 Zeis Ikon AG Germany"
A Linhof large format camera. There is a view finder at side with rubber eye cup. A hand screw at the top. There are dials, buttons, and levers around the camera. At one side there is a door that reveals a bellows lens when opened. A tripod mount at the bottom. There is a leather strap attached on one side.
A Linhof large format camera. There is a view finder at side with rubber eye cup. A hand screw at the top. There are dials, buttons, and levers around the camera. At one side there is a door that reveals a bellows lens when opened. A tripod mount at the bottom. There is a leather strap attached on one side.
A small blue and grey metal pin. With a picture of the Delta King Ship in the middle with markings around the border that reads "DELTA KING DAYS KITIMAT B.C. Silver Anniversary 1978" there is a safety pin in the back with manufacturer information at the back.
A small blue and grey metal pin. With a picture of the Delta King Ship in the middle with markings around the border that reads "DELTA KING DAYS KITIMAT B.C. Silver Anniversary 1978" there is a safety pin in the back with manufacturer information at the back.
Two copies of a round orange and blue ACT pin. The design has the ACT logo with the date "OCT. 17, 1982" and the roman numeral "III" at the end of the T. This pin is for the Aluminum City Telethon.
Two copies of a round orange and blue ACT pin. The design has the ACT logo with the date "OCT. 17, 1982" and the roman numeral "III" at the end of the T. This pin is for the Aluminum City Telethon.
Physical Condition
Fair
Material
metal
plastic
paper
Condition Remarks
One pin is missing its back so it cannot be attached to a shirt.
A round white and blue ACT pin. The design has the ACT logo with the date "OCT. 17, 1982" and the roman numeral "III" at the end of the T. This pin is for the Aluminum City Telethon.
A round white and blue ACT pin. The design has the ACT logo with the date "OCT. 17, 1982" and the roman numeral "III" at the end of the T. This pin is for the Aluminum City Telethon.
Physical Condition
Fair
Material
metal
plastic
paper
Condition Remarks
Pin is missing its back so it cannot be attached to a shirt.
Two copies of round black and green ACT pin. The design has the ACT logo with the date "OCT. 16, 1983" and the roman numeral "IV" at the end of the T. This pin is for the Aluminum City Telethon.
Two copies of round black and green ACT pin. The design has the ACT logo with the date "OCT. 16, 1983" and the roman numeral "IV" at the end of the T. This pin is for the Aluminum City Telethon.
Physical Condition
Poor
Material
metal
plastic
paper
Condition Remarks
One pin is missing its pin so it cannot be attached to a shirt.
A round black and yellow ACT pin. The design has the ACT logo with the date "OCT. 16, 1983" and the roman numeral "IV" at the end of the T. This pin is for the Aluminum City Telethon.
A round black and yellow ACT pin. The design has the ACT logo with the date "OCT. 16, 1983" and the roman numeral "IV" at the end of the T. This pin is for the Aluminum City Telethon.
Physical Condition
Fair
Material
metal
plastic
paper
Condition Remarks
The button is missing its pin so it cannot be attached to a shirt.
A round black and red ACT pin. The design has the ACT logo with the date "OCT. 21/84" and the roman numeral "V" at the end of the T. This pin is for the Aluminum City Telethon.
A round black and red ACT pin. The design has the ACT logo with the date "OCT. 21/84" and the roman numeral "V" at the end of the T. This pin is for the Aluminum City Telethon.
A round black and grey ACT pin. The design has the ACT logo with the date "OCT. 20, 1985" and the roman numeral "VI" at the end of the T. This pin is for the Aluminum City Telethon.
A round black and grey ACT pin. The design has the ACT logo with the date "OCT. 20, 1985" and the roman numeral "VI" at the end of the T. This pin is for the Aluminum City Telethon.
A round blue and white ACT pin. The design has the ACT logo with the date "OCT. 19, 1986" and the roman numeral "VII" at the end of the T. This pin is for the Aluminum City Telethon.
A round blue and white ACT pin. The design has the ACT logo with the date "OCT. 19, 1986" and the roman numeral "VII" at the end of the T. This pin is for the Aluminum City Telethon.
A round orange and black ACT pin. The design has the ACT logo with the date "OCT. 19, 1986" and the roman numeral "VII" at the end of the T. This pin is for the Aluminum City Telethon.
A round orange and black ACT pin. The design has the ACT logo with the date "OCT. 19, 1986" and the roman numeral "VII" at the end of the T. This pin is for the Aluminum City Telethon.
A round white and blue ACT pin. The design has the ACT logo with the date "OCT. 16, 1988" and the roman numeral "IX" at the end of the T. This pin is for the Aluminum City Telethon.
A round white and blue ACT pin. The design has the ACT logo with the date "OCT. 16, 1988" and the roman numeral "IX" at the end of the T. This pin is for the Aluminum City Telethon.
A round black and grey ACT pin. The design has the ACT logo with the date "OCT. 16, 1989" and the roman numeral "X" at the end of the T. This pin is for the Aluminum City Telethon.
A round black and grey ACT pin. The design has the ACT logo with the date "OCT. 16, 1989" and the roman numeral "X" at the end of the T. This pin is for the Aluminum City Telethon.
A round purple and white ACT pin. The design has the ACT logo with the date "OCT. 14, 1990" and the roman numeral "XI" at the end of the T. This pin is for the Aluminum City Telethon.
A round purple and white ACT pin. The design has the ACT logo with the date "OCT. 14, 1990" and the roman numeral "XI" at the end of the T. This pin is for the Aluminum City Telethon.
A round green and white ACT pin. The design has the ACT logo with the date "OCT. 14, 1990" and the roman numeral "XI" at the end of the T. This pin is for the Aluminum City Telethon.
A round green and white ACT pin. The design has the ACT logo with the date "OCT. 14, 1990" and the roman numeral "XI" at the end of the T. This pin is for the Aluminum City Telethon.