Skip header and navigation

Revise Search

7 records – page 1 of 1.

Object Type
gift
Material
metal
Accession Number
970.113.9
Description
9 cm angle cut cutter blade
Object Type
gift
Quantity
1
Description
9 cm angle cut cutter blade
Physical Condition
poor
Material
metal
Condition Remarks
rusted
Length
9
Accession Number
970.113.9
Category
Construction T&E
Location
Bay 4 Shelf 2 Box 2
Object Type
gift
Material
metal
Accession Number
970.113.10-17
Description
Cutter blades were used for cutting wood to different sizes and forms.Various sizes.
Object Type
gift
Description
Cutter blades were used for cutting wood to different sizes and forms.Various sizes.
Physical Condition
fair
Material
metal
Accession Number
970.113.10-17
Category
Construction T&E
Location
Bay 4 Shelf 2 Box 2
Object Type
gift
Material
stone
Accession Number
972.91.1-3
Description
These stone hammers are black, and each has its own shape. (1) 72.91.1 -Stone-age hammer - 18 x 8 x 8 cm. - very crude. (2) 71.91.2 - Mortor-like artifact - 10 cm.high and 9 cm. wide. (3) 71.91.3 - Pestle-like artifact - 26.6 x 6.4 cm.
Object Type
gift
Quantity
3
Description
These stone hammers are black, and each has its own shape. (1) 72.91.1 -Stone-age hammer - 18 x 8 x 8 cm. - very crude. (2) 71.91.2 - Mortor-like artifact - 10 cm.high and 9 cm. wide. (3) 71.91.3 - Pestle-like artifact - 26.6 x 6.4 cm.
Physical Condition
good
Material
stone
Accession Number
972.91.1-3
Category
Construction T&E
Location
artifact storage
Object Type
gift
Material
metal
Accession Number
978.14.1
Description
Whip saw blade has one handle missing. Blade is very rusty.
Object Type
gift
Quantity
1
Description
Whip saw blade has one handle missing. Blade is very rusty.
Physical Condition
fair
Material
metal
Condition Remarks
Very rusted.
Width
15
Length
150
Accession Number
978.14.1
Category
Construction T&E
Location
Settlement Display
Object Type
gift
Material
stone
Accession Number
984.79
Description
Hammer Stone
Object Type
gift
Quantity
1
Description
Hammer Stone
Physical Condition
fair
Material
stone
Condition Remarks
Stone is eroded from the back.
Length
28
Accession Number
984.79
Category
Construction T&E
Date Range
Nineteenth Century
GMD
Camera Equipment
Object Type
Camera
Material
metal
plastic
Wood
Accession Number
2014.5.1 a
Description
A view camera with a brown wood frame, red plastic accordion body, and metal parts like its knobs and ridges for adjusting the body. There are markings on a metal piece stuck on the wooden end that read: "REMBRANDT PORTRAIT CAMERA MODEL II BURKE & JAMES CHICAGO ILL., U.S.A.". the lens is missing. It was used in Max's Photo Studio Ltd.
GMD
Camera Equipment
Object Type
Camera
Description
A view camera with a brown wood frame, red plastic accordion body, and metal parts like its knobs and ridges for adjusting the body. There are markings on a metal piece stuck on the wooden end that read: "REMBRANDT PORTRAIT CAMERA MODEL II BURKE & JAMES CHICAGO ILL., U.S.A.". the lens is missing. It was used in Max's Photo Studio Ltd.
Physical Condition
Good
Material
metal
plastic
Wood
Height
31.5 cm
Width
23.5 cm
Length
34.5 cm
Date Range
Nineteenth Century
Accession Number
2014.5.1 a
Category
Photographic T&E
Location
Bay 1 Shelf 3
GMD
Photographic T&E
Object Type
View Camera
Material
Wood
metal
glass
Accession Number
2014.5.110
Description
A view camera. At the back there is information about the camera XXX"EASTMAN VIEW CAMERA NO.33A MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y." Above it is a square cut out, most likely a view finder. At one side there is a metal dial to adjust the bellows lens. above it is a metal hand turnable screw. At the other side there is a small metal dial. At the front there is a wooden part that can be adjusted along with a piece of glass within a frame right beind it. XXXAt bottom there is a screw hole to put a tripod through it. And a hand turnable screw at side. Latch at top to allow bellows lens to extend.
GMD
Photographic T&E
Object Type
View Camera
Description
A view camera. At the back there is information about the camera XXX"EASTMAN VIEW CAMERA NO.33A MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y." Above it is a square cut out, most likely a view finder. At one side there is a metal dial to adjust the bellows lens. above it is a metal hand turnable screw. At the other side there is a small metal dial. At the front there is a wooden part that can be adjusted along with a piece of glass within a frame right beind it. XXXAt bottom there is a screw hole to put a tripod through it. And a hand turnable screw at side. Latch at top to allow bellows lens to extend.
Physical Condition
Fair
Material
Wood
metal
glass
Condition Remarks
Dusty
Height
12.7 cm
Width
20.5 cm
Length
25.5 cm
Accession Number
2014.5.110
Category
Tools & Equipment for Communication
Location
Bay 5 Shelf 4 Box 4
Place of Manufacture
U.S.A.

7 records – page 1 of 1.