Skip header and navigation

Revise Search

3 records – page 1 of 1.

Object Type
gift
Material
metal-plated copper
Accession Number
970.55
Description
Kettle is nickel-plated copper, nickel is worn away. Very dented, missing lid and handle. Used as a water vessel, specialized for boiling water.
Object Type
gift
Quantity
1
Description
Kettle is nickel-plated copper, nickel is worn away. Very dented, missing lid and handle. Used as a water vessel, specialized for boiling water.
Physical Condition
poor
Material
metal-plated copper
Condition Remarks
Kettle is in very poor condition. The lid is missing and it has no handle. Very dented all over.
Height
17.6
Width
43
Accession Number
970.55
Category
Food Processing T&E
Location
Settlement Display
Object Type
gift
Material
wood and iron
Accession Number
970.62
Description
Water wheel axle is 147 x 17 cm. It is a piece of wood with two nails coming out of both ends. It has some cracks on it.
Object Type
gift
Quantity
1
Description
Water wheel axle is 147 x 17 cm. It is a piece of wood with two nails coming out of both ends. It has some cracks on it.
Physical Condition
fair
Material
wood and iron
Condition Remarks
Has a few cracks.
Width
17.7
Length
147
Accession Number
970.62
Category
Energy Production T&E
Location
artifact storage
GMD
Photographic T&E
Object Type
View Camera
Material
Wood
metal
glass
Accession Number
2014.5.110
Description
A view camera. At the back there is information about the camera XXX"EASTMAN VIEW CAMERA NO.33A MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y." Above it is a square cut out, most likely a view finder. At one side there is a metal dial to adjust the bellows lens. above it is a metal hand turnable screw. At the other side there is a small metal dial. At the front there is a wooden part that can be adjusted along with a piece of glass within a frame right beind it. XXXAt bottom there is a screw hole to put a tripod through it. And a hand turnable screw at side. Latch at top to allow bellows lens to extend.
GMD
Photographic T&E
Object Type
View Camera
Description
A view camera. At the back there is information about the camera XXX"EASTMAN VIEW CAMERA NO.33A MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y." Above it is a square cut out, most likely a view finder. At one side there is a metal dial to adjust the bellows lens. above it is a metal hand turnable screw. At the other side there is a small metal dial. At the front there is a wooden part that can be adjusted along with a piece of glass within a frame right beind it. XXXAt bottom there is a screw hole to put a tripod through it. And a hand turnable screw at side. Latch at top to allow bellows lens to extend.
Physical Condition
Fair
Material
Wood
metal
glass
Condition Remarks
Dusty
Height
12.7 cm
Width
20.5 cm
Length
25.5 cm
Accession Number
2014.5.110
Category
Tools & Equipment for Communication
Location
Bay 5 Shelf 4 Box 4
Place of Manufacture
U.S.A.