A view camera with a brown wood frame, red plastic accordion body, and metal parts like its knobs and ridges for adjusting the body. There are markings on a metal piece stuck on the wooden end that read: "REMBRANDT PORTRAIT CAMERA MODEL II BURKE & JAMES CHICAGO ILL., U.S.A.". the lens is missing. It was used in Max's Photo Studio Ltd.
A view camera with a brown wood frame, red plastic accordion body, and metal parts like its knobs and ridges for adjusting the body. There are markings on a metal piece stuck on the wooden end that read: "REMBRANDT PORTRAIT CAMERA MODEL II BURKE & JAMES CHICAGO ILL., U.S.A.". the lens is missing. It was used in Max's Photo Studio Ltd.
a) A black camera with dials, numbers, letters, and symbols. There are markings at the front "LEICAFLEX SL2 Leitz WETZLAR"
b) A black camera lens with numbers, letters, and 3 dials
c) A black camera lens hood that fits over the camera lens with buttons in order to attach it, there are numbers and letters printed on it. The cap fits over the hood and reads: "GERMANY LEITZ WETZLAR"
a) A black camera with dials, numbers, letters, and symbols. There are markings at the front "LEICAFLEX SL2 Leitz WETZLAR"
b) A black camera lens with numbers, letters, and 3 dials
c) A black camera lens hood that fits over the camera lens with buttons in order to attach it, there are numbers and letters printed on it. The cap fits over the hood and reads: "GERMANY LEITZ WETZLAR"
a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a square metal label holder at the back, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-70mm lens. It is a long lens with numbers and three large dials to adjust focus and zoom.
c) A Vivitar 72mm SKYLIGHT lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black large lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside.
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap with a grey metal frame.
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a square metal label holder at the back, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-70mm lens. It is a long lens with numbers and three large dials to adjust focus and zoom.
c) A Vivitar 72mm SKYLIGHT lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black large lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside.
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap with a grey metal frame.
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a glass display at the back for the ASA/ISO, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-105mm lens. It is a long lens with numbers and two dials. the Lens can be extended. It has colored numbers at the side
c) A B+W 52 E lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black Nikon HK-11 lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside. it has black felt inside
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a glass display at the back for the ASA/ISO, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-105mm lens. It is a long lens with numbers and two dials. the Lens can be extended. It has colored numbers at the side
c) A B+W 52 E lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black Nikon HK-11 lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside. it has black felt inside
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap
a) A Mamiya Professional Camera. It has no lens. The top has a glass view finder. One side has a dial, the other side has a lever with a dial, there is a chart with numbers above the dial. Underneath, has Mamiya branding and a hole with screw grooves to attach a tripod to it. The front has a hole to attach a lens or extension tube. The back can be detached or reattached with the two locks.
b) A Mamiya plastic back panel with "Mamiya" marked at the front.
c) A Mamiya lens cap it has ridges on the side with a "Mamiya" marking at the front
a) A Mamiya Professional Camera. It has no lens. The top has a glass view finder. One side has a dial, the other side has a lever with a dial, there is a chart with numbers above the dial. Underneath, has Mamiya branding and a hole with screw grooves to attach a tripod to it. The front has a hole to attach a lens or extension tube. The back can be detached or reattached with the two locks.
b) A Mamiya plastic back panel with "Mamiya" marked at the front.
c) A Mamiya lens cap it has ridges on the side with a "Mamiya" marking at the front
A Linhof large format camera. There is a view finder at side with rubber eye cup. A hand screw at the top. There are dials, buttons, and levers around the camera. At one side there is a door that reveals a bellows lens when opened. A tripod mount at the bottom. There is a leather strap attached on one side.
A Linhof large format camera. There is a view finder at side with rubber eye cup. A hand screw at the top. There are dials, buttons, and levers around the camera. At one side there is a door that reveals a bellows lens when opened. A tripod mount at the bottom. There is a leather strap attached on one side.
a) A leather hard shell camera case with a strap. There are snap buttons to close and open it. There is a hand turnable screw to securly hold the camera in the case.
b) An Agfa Flexilette camera. It has a dual lens with three dials, at the front with markings: "AGFA COLOR APOTAR 1: 2.8/45" Dial at top to change numbers in window with button there is a window and some dried glue around it, the viewfinder is possibly missing. There are two dials at the bottom. the sides have metal loops to hook a strap.
a) A leather hard shell camera case with a strap. There are snap buttons to close and open it. There is a hand turnable screw to securly hold the camera in the case.
b) An Agfa Flexilette camera. It has a dual lens with three dials, at the front with markings: "AGFA COLOR APOTAR 1: 2.8/45" Dial at top to change numbers in window with button there is a window and some dried glue around it, the viewfinder is possibly missing. There are two dials at the bottom. the sides have metal loops to hook a strap.
Physical Condition
Fair
Material
metal
plastic
glass
leather
Condition Remarks
The leather bag is bent at the front, the lens is dirty
Front has 3 lenses with brand information "Marksman MADE IN CAMERA FOR BERNARD MARKS & CO." viewfinder, lever and dial at side. At top is a Leather strap, lever for "TIME (arrow) SNAP" and a viewfinder. The back can be opened to reveal the inside of the camera.
Front has 3 lenses with brand information "Marksman MADE IN CAMERA FOR BERNARD MARKS & CO." viewfinder, lever and dial at side. At top is a Leather strap, lever for "TIME (arrow) SNAP" and a viewfinder. The back can be opened to reveal the inside of the camera.
a) A dark brown Zeiss Ikon camera case. The camera case can come apart and be reatached. The bottom has a hand turnable screw to snugly attach a camera onto it.
b) A Zeiss Ikon camera. At the front there is a lens, markings read "Carl Zeiss 2,8/50 3458458" "Contaflex SYNCHRO-COMPUR" there are three dials and a flash. Two dials at the top with numbers. The back has a view finder and film compartment. The bottom has two hand turnable screws and a screw hole for a tripod. At either side there is a metal loop for a camera strap.
c) A rubber Zeiss Ikon rubber lens hood the sides have markings "1109 S27 Zeis Ikon AG Germany"
a) A dark brown Zeiss Ikon camera case. The camera case can come apart and be reatached. The bottom has a hand turnable screw to snugly attach a camera onto it.
b) A Zeiss Ikon camera. At the front there is a lens, markings read "Carl Zeiss 2,8/50 3458458" "Contaflex SYNCHRO-COMPUR" there are three dials and a flash. Two dials at the top with numbers. The back has a view finder and film compartment. The bottom has two hand turnable screws and a screw hole for a tripod. At either side there is a metal loop for a camera strap.
c) A rubber Zeiss Ikon rubber lens hood the sides have markings "1109 S27 Zeis Ikon AG Germany"
A Kitimat tea set consisting of 1 teapot with lid (.1a-b), four saucers (.2-.5), four cups (.6-.9), a sugar bowl (.10), creamer pitcher (.11), and stand (.12).
All are white with gold trim, except for the stand, which is entirely gold.
The teapot, cups .6, .8, and .9, the creamer pitcher and the sugar bowl all have two images, one on either side: a bridge crossing a river, and an overhead view of the Alcan project near the Douglas Channel. Beneath the first image is the caption "Aluminum Center of the World" beneath and the words "Kitimat, B.C." in a yellow banner.
Cup .7 has an image of the Delta King in the Channel, with "Kitimat, B.C. Aluminum Centre of Canada" on yellow banners beneath it.
Plate .2 has this same image of the Delta King, while plates .3-.5 have an aerial view of Kitimat.
A Kitimat tea set consisting of 1 teapot with lid (.1a-b), four saucers (.2-.5), four cups (.6-.9), a sugar bowl (.10), creamer pitcher (.11), and stand (.12).
All are white with gold trim, except for the stand, which is entirely gold.
The teapot, cups .6, .8, and .9, the creamer pitcher and the sugar bowl all have two images, one on either side: a bridge crossing a river, and an overhead view of the Alcan project near the Douglas Channel. Beneath the first image is the caption "Aluminum Center of the World" beneath and the words "Kitimat, B.C." in a yellow banner.
Cup .7 has an image of the Delta King in the Channel, with "Kitimat, B.C. Aluminum Centre of Canada" on yellow banners beneath it.
Plate .2 has this same image of the Delta King, while plates .3-.5 have an aerial view of Kitimat.
Physical Condition
Excellent
Material
china
Condition Remarks
Interior of teapot has brown stains from usage.
Height
13 cm (teapot)
9 cm (creamer pitcher)
7 cm (teacups)
6 cm (sugar bowl)
Length
19.5 cm (teapot, spout to handle)
11 cm (cups, including handle)
9.5 cm (creamer pitcher, including handle)
Diameter
13 cm (teapot)
9 cm (sugar bowl)
8.5 cm (teacups)
6 cm (creamer pitcher)
14 cm (saucers)
Inscriptions
All pieces (except the stand) say "Royal Ascot Bone China" and "Made in England" on the bottom with the image of a crown. The teapot and creamer pitcher are numbered 159, the sugar bowl and most of the plates and cups 159A, and plate .2 and cup .7 280. The teapot and creamer pitcher say say "Munson's Drugs Ltd," and plate .2 and cup .7 say "exclusively for Erwin Jewellery."
