Skip header and navigation

Revise Search

7 records – page 1 of 1.

Object Type
material sample
Material
plastic
glass
Accession Number
2019.32.1
Description
This bottle of alumina has alumina with different colors because of its different impurities. It is cased in a glass bottle with a plastic screw-top lid there is a paper label on top that is labelled "5" and "1" is labelled on the side.
Object Type
material sample
Description
This bottle of alumina has alumina with different colors because of its different impurities. It is cased in a glass bottle with a plastic screw-top lid there is a paper label on top that is labelled "5" and "1" is labelled on the side.
Physical Condition
Good
Material
plastic
glass
Condition Remarks
Some of the alumina is mixed at the top, Plastic lid is scratched
Height
11.5 cm
Diameter
6.0 cm
Accession Number
2019.32.1
Location
Bay 1 Shelf 3 Box 5
Object Type
material sample
Material
glass
metal
Accession Number
2019.32.2
Description
A small glass bottle of white powder called Calcined Aluminum with a metal screw-top lid. The paper label on the side reads "CALCINED ALUMINUM" with a paper label at the top labelled "5" and a "2" at the bottom.
Object Type
material sample
Description
A small glass bottle of white powder called Calcined Aluminum with a metal screw-top lid. The paper label on the side reads "CALCINED ALUMINUM" with a paper label at the top labelled "5" and a "2" at the bottom.
Physical Condition
Fair
Material
glass
metal
Condition Remarks
Paper label is faded and ripped
Height
7.6 cm
Diameter
4.5 cm
Accession Number
2019.32.2
Location
Bay 1 Shelf 3 Box 5

Artifacts from Poland

https://collections.kitimatmuseum.ca/en/permalink/artifact557
Accession Number
973.15.1-16
Description
Artifacts kept in locked show case.
Quantity
1
Description
Artifacts kept in locked show case.
Accession Number
973.15.1-16
Object Type
Loan
Accession Number
2009.21
Description
Nipple Top Maul
Object Type
Loan
Description
Nipple Top Maul
Length
10.5 cm
Accession Number
2009.21
Biographical Notes
Found on the southern end of Pitt Island
Category
Woodworking T&E
Location
Second floor display
Date Range
Nineteenth Century
GMD
Camera Equipment
Object Type
Camera
Material
metal
plastic
Wood
Accession Number
2014.5.1 a
Description
A view camera with a brown wood frame, red plastic accordion body, and metal parts like its knobs and ridges for adjusting the body. There are markings on a metal piece stuck on the wooden end that read: "REMBRANDT PORTRAIT CAMERA MODEL II BURKE & JAMES CHICAGO ILL., U.S.A.". the lens is missing. It was used in Max's Photo Studio Ltd.
GMD
Camera Equipment
Object Type
Camera
Description
A view camera with a brown wood frame, red plastic accordion body, and metal parts like its knobs and ridges for adjusting the body. There are markings on a metal piece stuck on the wooden end that read: "REMBRANDT PORTRAIT CAMERA MODEL II BURKE & JAMES CHICAGO ILL., U.S.A.". the lens is missing. It was used in Max's Photo Studio Ltd.
Physical Condition
Good
Material
metal
plastic
Wood
Height
31.5 cm
Width
23.5 cm
Length
34.5 cm
Date Range
Nineteenth Century
Accession Number
2014.5.1 a
Category
Photographic T&E
Location
Bay 1 Shelf 3
GMD
Photographic T&E
Object Type
View Camera
Material
Wood
metal
glass
Accession Number
2014.5.110
Description
A view camera. At the back there is information about the camera XXX"EASTMAN VIEW CAMERA NO.33A MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y." Above it is a square cut out, most likely a view finder. At one side there is a metal dial to adjust the bellows lens. above it is a metal hand turnable screw. At the other side there is a small metal dial. At the front there is a wooden part that can be adjusted along with a piece of glass within a frame right beind it. XXXAt bottom there is a screw hole to put a tripod through it. And a hand turnable screw at side. Latch at top to allow bellows lens to extend.
GMD
Photographic T&E
Object Type
View Camera
Description
A view camera. At the back there is information about the camera XXX"EASTMAN VIEW CAMERA NO.33A MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y." Above it is a square cut out, most likely a view finder. At one side there is a metal dial to adjust the bellows lens. above it is a metal hand turnable screw. At the other side there is a small metal dial. At the front there is a wooden part that can be adjusted along with a piece of glass within a frame right beind it. XXXAt bottom there is a screw hole to put a tripod through it. And a hand turnable screw at side. Latch at top to allow bellows lens to extend.
Physical Condition
Fair
Material
Wood
metal
glass
Condition Remarks
Dusty
Height
12.7 cm
Width
20.5 cm
Length
25.5 cm
Accession Number
2014.5.110
Category
Tools & Equipment for Communication
Location
Bay 5 Shelf 4 Box 4
Place of Manufacture
U.S.A.
Object Type
material sample
Material
Alumina
glass
Manufacturer
Alcan Jamaica Limited at Kirkvine Works
Accession Number
2021.24.1
Description
Alumina from alcan inside a glass jar.
Object Type
material sample
Description
Alumina from alcan inside a glass jar.
Physical Condition
good
Material
Alumina
glass
Height
7cm
Accession Number
2021.24.1
Location
Bay 2 Shelf 1 Box 3
Manufacturer
Alcan Jamaica Limited at Kirkvine Works

7 records – page 1 of 1.