Tacking iron has triangular metal head with a temperature dial on top. Base of the head is painted green. It is attached to a wooded handle by a metal rod, rivetted to the head. Attached at the base of the handle is a rubber cord endinging in a two pronged plug. Protecting the rubber cord is a flexible spiral metal sheath attached at the base of the wooden handle.
Tacking iron has triangular metal head with a temperature dial on top. Base of the head is painted green. It is attached to a wooded handle by a metal rod, rivetted to the head. Attached at the base of the handle is a rubber cord endinging in a two pronged plug. Protecting the rubber cord is a flexible spiral metal sheath attached at the base of the wooden handle.
Physical Condition
Fair
Material
metal and wood
rubber
Condition Remarks
Dirty, scratched, green paint on head is worn away
Rectangular ingot with ALCAN engraved in the front in capital letters. Silver in colour. Corners are rounded.
Physical Condition
Fair
Material
metal
Condition Remarks
Many scratches, stains, and other marks across the surface, both front and back. Many small holes in back. Stains in various colours - white, pinkish, brown (possible rust).
Stamp used by the Kitimat Choristers, a local choral group. Handle is black with "Sentinel Stationery and Office Equipment Kitimat" written in small gold letters. The base is reddish brown with the words "Kitimat Choristers" written across it.
Stamp used by the Kitimat Choristers, a local choral group. Handle is black with "Sentinel Stationery and Office Equipment Kitimat" written in small gold letters. The base is reddish brown with the words "Kitimat Choristers" written across it.
Physical Condition
Good
Material
Wood
Condition Remarks
General wear & tear. Some of the red wood is chipped away along the edges of the base.
Photo depicts a tent with flat-top house assembly on a production line in West Vancouver for Johnson-Crooks Construction Corporation.
Notes
Title based on content of photograph. -- Slide No. 40 -- The circus tent assembly line was erected at Vancouver Tug and Barge below the Lion's Gate Bridge. Temporary housing destined for Kitimat was assembled there in three sections, then barged to Kitimat - 10 houses or 30 sections on each barge. -- Electrician Bill Frahler wired approximately 2,000 houses in Kitimat camps and townsite between 1954 and 1958, working first for Johnson-Crooks then Straits Construction, both U.S. contractors. Bill Frahler Collection 2003.32
Photo depicts two barges moored in Douglas Channel and loaded with flat-top house sections for construction workers and their families.
Notes
Title based on content of photograph. -- Temporary housing destined for Kitimat was assembled at Vancouver Tug and Barge below the Lion's Gate Bridge in three sections, then barged to Kitimat - 10 houses or 30 sections on each barge. -- Electrician Bill Frahler wired approximately 2,000 houses in Kitimat camps and townsite between 1954 and 1958, working first for Johnson-Crooks then Straits Construction, both U.S. contractors. Pat Jimenez Collection
