2 copies of a square lens hood from Linhof. The lens hood has a round bottom with a scew in order for it to fit over a lens. Then it tapers off into a square shape. The hood inside has ridges. There are markings on the side that read "Universal - Linhof - Sonnenblende West-Germany 42-51 mm"
2 copies of a square lens hood from Linhof. The lens hood has a round bottom with a scew in order for it to fit over a lens. Then it tapers off into a square shape. The hood inside has ridges. There are markings on the side that read "Universal - Linhof - Sonnenblende West-Germany 42-51 mm"
3 copies of a Linhof lens hood. Two of them have an end with a circle at the bottom and a silver screw so it can attach onto a camera lens. Instead of a screw the other lens hood has a lever, one side of the lever is labelled "off" and the other is blank. All three have a square shaped lens hood. Underneath the square shaped lens there are markings that read: "Linhof Universal - Sonnenblende West - Germany 42mm"
3 copies of a Linhof lens hood. Two of them have an end with a circle at the bottom and a silver screw so it can attach onto a camera lens. Instead of a screw the other lens hood has a lever, one side of the lever is labelled "off" and the other is blank. All three have a square shaped lens hood. Underneath the square shaped lens there are markings that read: "Linhof Universal - Sonnenblende West - Germany 42mm"
A round plastic Linhof reducing ring. The side has a marking that reads "42" on the side. The ring has an intricate shape inside. The specific use for this artifact is unknown.
A round plastic Linhof reducing ring. The side has a marking that reads "42" on the side. The ring has an intricate shape inside. The specific use for this artifact is unknown.
A beige plastic Linhof anatomical grip. The grip is for the left hand. There is a metal rod at the top that can be pressed down to control the piece of metal that sticks out of the wire. There is a metal attachment piece at the side along with two plastic dials that keep the leather strap in place. There are hand grooves with a leather strap beside it.
A beige plastic Linhof anatomical grip. The grip is for the left hand. There is a metal rod at the top that can be pressed down to control the piece of metal that sticks out of the wire. There is a metal attachment piece at the side along with two plastic dials that keep the leather strap in place. There are hand grooves with a leather strap beside it.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath that reads "MAX PATZELT" there is a white label at the side with information "super rollex 56 x 72" at the top there is a lever and a switch with an arrow on it. at the right there is a handle to remove a metal sheet, beside it there are two buttons to open the film holder. Underneath there is a metal attachment at the bottom.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath that reads "MAX PATZELT" there is a white label at the side with information "super rollex 56 x 72" at the top there is a lever and a switch with an arrow on it. at the right there is a handle to remove a metal sheet, beside it there are two buttons to open the film holder. Underneath there is a metal attachment at the bottom.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the Film Holder and a black name tag underneath it, it reads "MAX PATZELT" there is a white label at the right side with information "super rollex 56 x 72" at the top there is a lever and two circular clear plastic pieces beside it. At the right there is a handle to remove a metal sheet. Underneath there is a dial to open the film holder.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the Film Holder and a black name tag underneath it, it reads "MAX PATZELT" there is a white label at the right side with information "super rollex 56 x 72" at the top there is a lever and two circular clear plastic pieces beside it. At the right there is a handle to remove a metal sheet. Underneath there is a dial to open the film holder.
A Black Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath it, it reads "MAX PATZELT" above the emblem is a white label sticker. At the top there is a lever and one circular clear plastic piece beside it. Underneath the lever is a switch with a red arrow pointing right. At the right there is a handle to remove a metal sheet. Underneath there is a metal attachment.
A Black Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath it, it reads "MAX PATZELT" above the emblem is a white label sticker. At the top there is a lever and one circular clear plastic piece beside it. Underneath the lever is a switch with a red arrow pointing right. At the right there is a handle to remove a metal sheet. Underneath there is a metal attachment.
Physical Condition
Poor
Material
metal
plastic
Condition Remarks
Dirty, ripped, scratched, there is a broken piece inside
6 different types of slip in filters, each of them are stored in cardboard boxes with Linhof branding. All of them have black plastic frames on each of them with linhof branding on the plastic tab and the number "70" under the branding.
a) A red Linhof slip-in filter there is a number "1" on the tab.
b) A yellow Linhof slip-in filter there is a number "2" on the plastic tab.
c) An orange Linhof slip-in filter.
d) A clear Linhof slip-in filter. The letters "UV" are on one side of the plastic tab.
e) A metal mesh screen Linhof slip-in filter. In same box with f)
f) A layered metal mesh screen Linhof slip-in filter. There is glue on the edges of the mesh. In the same box as e)
6 different types of slip in filters, each of them are stored in cardboard boxes with Linhof branding. All of them have black plastic frames on each of them with linhof branding on the plastic tab and the number "70" under the branding.
a) A red Linhof slip-in filter there is a number "1" on the tab.
b) A yellow Linhof slip-in filter there is a number "2" on the plastic tab.
c) An orange Linhof slip-in filter.
d) A clear Linhof slip-in filter. The letters "UV" are on one side of the plastic tab.
e) A metal mesh screen Linhof slip-in filter. In same box with f)
f) A layered metal mesh screen Linhof slip-in filter. There is glue on the edges of the mesh. In the same box as e)
Physical Condition
Fair
Material
cardboard
plastic
glass
Condition Remarks
One of them has glue on the lens and the cardboard box is starting to detriorate
A beige Linhof ball socket tripod head. The bottom has a dial that can be turned if you unscrew the hand turnable screw at the side, along with a screw hole to attach a tripod into it. Above the dial are numbers, above that is a screw to unlock the ball joint in order to turn it around. the top of the joint has a flat round base and screw to attach it to something, probably a camera. A thread with a red seal is tied to the side screw.
A beige Linhof ball socket tripod head. The bottom has a dial that can be turned if you unscrew the hand turnable screw at the side, along with a screw hole to attach a tripod into it. Above the dial are numbers, above that is a screw to unlock the ball joint in order to turn it around. the top of the joint has a flat round base and screw to attach it to something, probably a camera. A thread with a red seal is tied to the side screw.
A large Linhof camera tripod. It has a large lever at the top with three screw dials and a crank, they are all used to adjust the tripod head. At the bottom there are three screw knobs to adjust the legs of the tripod. Linhof emblem at top of tripod head. It is meant for a large format camera
A large Linhof camera tripod. It has a large lever at the top with three screw dials and a crank, they are all used to adjust the tripod head. At the bottom there are three screw knobs to adjust the legs of the tripod. Linhof emblem at top of tripod head. It is meant for a large format camera
A Linhof large format camera. There is a view finder at side with rubber eye cup. A hand screw at the top. There are dials, buttons, and levers around the camera. At one side there is a door that reveals a bellows lens when opened. A tripod mount at the bottom. There is a leather strap attached on one side.
A Linhof large format camera. There is a view finder at side with rubber eye cup. A hand screw at the top. There are dials, buttons, and levers around the camera. At one side there is a door that reveals a bellows lens when opened. A tripod mount at the bottom. There is a leather strap attached on one side.
A light brown Linhof film holder. There is a label on the side that reads "Super Rollex 56 x 72" and a red name tag at the bottom front that reads "MAX PATZELT" at the top front there is a switch with an arrow pointing at the left. At the top there is a lever and a clear plastic circle to show the numbers inside. At the bottom there is a clip to hold the information for some film in this case it is a Kodak EP 120. Plastic tab at side to remove metal sheet.
A light brown Linhof film holder. There is a label on the side that reads "Super Rollex 56 x 72" and a red name tag at the bottom front that reads "MAX PATZELT" at the top front there is a switch with an arrow pointing at the left. At the top there is a lever and a clear plastic circle to show the numbers inside. At the bottom there is a clip to hold the information for some film in this case it is a Kodak EP 120. Plastic tab at side to remove metal sheet.
Physical Condition
Poor
Material
metal
plastic
Condition Remarks
The emblem is missing and the plastic tab appears to be melted