A large Linhof camera tripod. It has a large lever at the top with three screw dials and a crank, they are all used to adjust the tripod head. At the bottom there are three screw knobs to adjust the legs of the tripod. Linhof emblem at top of tripod head. It is meant for a large format camera
A large Linhof camera tripod. It has a large lever at the top with three screw dials and a crank, they are all used to adjust the tripod head. At the bottom there are three screw knobs to adjust the legs of the tripod. Linhof emblem at top of tripod head. It is meant for a large format camera
2 copies of a square lens hood from Linhof. The lens hood has a round bottom with a scew in order for it to fit over a lens. Then it tapers off into a square shape. The hood inside has ridges. There are markings on the side that read "Universal - Linhof - Sonnenblende West-Germany 42-51 mm"
2 copies of a square lens hood from Linhof. The lens hood has a round bottom with a scew in order for it to fit over a lens. Then it tapers off into a square shape. The hood inside has ridges. There are markings on the side that read "Universal - Linhof - Sonnenblende West-Germany 42-51 mm"
3 copies of a Linhof lens hood. Two of them have an end with a circle at the bottom and a silver screw so it can attach onto a camera lens. Instead of a screw the other lens hood has a lever, one side of the lever is labelled "off" and the other is blank. All three have a square shaped lens hood. Underneath the square shaped lens there are markings that read: "Linhof Universal - Sonnenblende West - Germany 42mm"
3 copies of a Linhof lens hood. Two of them have an end with a circle at the bottom and a silver screw so it can attach onto a camera lens. Instead of a screw the other lens hood has a lever, one side of the lever is labelled "off" and the other is blank. All three have a square shaped lens hood. Underneath the square shaped lens there are markings that read: "Linhof Universal - Sonnenblende West - Germany 42mm"
A round plastic Linhof reducing ring. The side has a marking that reads "42" on the side. The ring has an intricate shape inside. The specific use for this artifact is unknown.
A round plastic Linhof reducing ring. The side has a marking that reads "42" on the side. The ring has an intricate shape inside. The specific use for this artifact is unknown.
A beige plastic Linhof anatomical grip. The grip is for the left hand. There is a metal rod at the top that can be pressed down to control the piece of metal that sticks out of the wire. There is a metal attachment piece at the side along with two plastic dials that keep the leather strap in place. There are hand grooves with a leather strap beside it.
A beige plastic Linhof anatomical grip. The grip is for the left hand. There is a metal rod at the top that can be pressed down to control the piece of metal that sticks out of the wire. There is a metal attachment piece at the side along with two plastic dials that keep the leather strap in place. There are hand grooves with a leather strap beside it.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath that reads "MAX PATZELT" there is a white label at the side with information "super rollex 56 x 72" at the top there is a lever and a switch with an arrow on it. at the right there is a handle to remove a metal sheet, beside it there are two buttons to open the film holder. Underneath there is a metal attachment at the bottom.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath that reads "MAX PATZELT" there is a white label at the side with information "super rollex 56 x 72" at the top there is a lever and a switch with an arrow on it. at the right there is a handle to remove a metal sheet, beside it there are two buttons to open the film holder. Underneath there is a metal attachment at the bottom.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the Film Holder and a black name tag underneath it, it reads "MAX PATZELT" there is a white label at the right side with information "super rollex 56 x 72" at the top there is a lever and two circular clear plastic pieces beside it. At the right there is a handle to remove a metal sheet. Underneath there is a dial to open the film holder.
A light brown Linhof Film Holder. There is a Linhof emblem on the middle of the Film Holder and a black name tag underneath it, it reads "MAX PATZELT" there is a white label at the right side with information "super rollex 56 x 72" at the top there is a lever and two circular clear plastic pieces beside it. At the right there is a handle to remove a metal sheet. Underneath there is a dial to open the film holder.
A Black Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath it, it reads "MAX PATZELT" above the emblem is a white label sticker. At the top there is a lever and one circular clear plastic piece beside it. Underneath the lever is a switch with a red arrow pointing right. At the right there is a handle to remove a metal sheet. Underneath there is a metal attachment.
A Black Linhof Film Holder. There is a Linhof emblem on the middle of the film holder and a red name tag underneath it, it reads "MAX PATZELT" above the emblem is a white label sticker. At the top there is a lever and one circular clear plastic piece beside it. Underneath the lever is a switch with a red arrow pointing right. At the right there is a handle to remove a metal sheet. Underneath there is a metal attachment.
Physical Condition
Poor
Material
metal
plastic
Condition Remarks
Dirty, ripped, scratched, there is a broken piece inside
a) A Linhof Reducing Lens slide out box. It has an orange sticker with information about the brand and black and white stripes as the background.
b) A black Linhof reducing lens it has the number "42" on the side. The inner circle has an intricate shape in the middle and three plastic nubs to attach it to something.
a) A Linhof Reducing Lens slide out box. It has an orange sticker with information about the brand and black and white stripes as the background.
b) A black Linhof reducing lens it has the number "42" on the side. The inner circle has an intricate shape in the middle and three plastic nubs to attach it to something.
A beige and black camera lens. "LINHOF - UNIVERSALSUCHER - TECHNIKA SCHNEIDER KREUZNACH" written around rim of lens, lens can be turned for profile or lanscape view. Two screws at side with numbers, emblem beneath lens. Viewfinder at back, with dial to extend lens. Grooves at the bottom to attach it to something.
A beige and black camera lens. "LINHOF - UNIVERSALSUCHER - TECHNIKA SCHNEIDER KREUZNACH" written around rim of lens, lens can be turned for profile or lanscape view. Two screws at side with numbers, emblem beneath lens. Viewfinder at back, with dial to extend lens. Grooves at the bottom to attach it to something.
Brown leather case with 7 Linhof polarizing lenses. each lens has a black plastic frame and are separated with cardstock in the leather case.
a) A small brown leather case with a snap button
b) A Linhof softening polarizing lens. Clear grid lines in clear glass. There is glue at the back
c) A Linhof polarizing lens with a metal mesh, This is used to make the lights appear to be like stars
d) A Linhof polarizing lens with a two layered metal mesh, This is used to make the lights appear to be like stars
e) An orange Linhof polarizing lens.
f) A yellow Linhof polarizing lens. There is a number "1" the plastic tab
g) A yellow Linhof polarizing lens. There is a number "2" on the plastic tab
h) A yellow Linhof polarizing lens. There is a number "3" on the plastic tab
Brown leather case with 7 Linhof polarizing lenses. each lens has a black plastic frame and are separated with cardstock in the leather case.
a) A small brown leather case with a snap button
b) A Linhof softening polarizing lens. Clear grid lines in clear glass. There is glue at the back
c) A Linhof polarizing lens with a metal mesh, This is used to make the lights appear to be like stars
d) A Linhof polarizing lens with a two layered metal mesh, This is used to make the lights appear to be like stars
e) An orange Linhof polarizing lens.
f) A yellow Linhof polarizing lens. There is a number "1" the plastic tab
g) A yellow Linhof polarizing lens. There is a number "2" on the plastic tab
h) A yellow Linhof polarizing lens. There is a number "3" on the plastic tab
Brown leather case with 6 Linhof polarizing lenses. Each lens has a black plastic frame and are separated with cardstock in the leather case.
a) A small brown leather case with a snap button
b) An empty plastic polarizing lens frame
c) A blue Linhof polarizing lens. Theres are markings on the tab that read "B12 (3x) Konvers. Filter"
d) A green Linhof polarizing lens. There is a green number "2" on the plastic tab
e) An red Linhof polarizing lens. There is a number "1" on the plastic tab
f) A pale orange Linhof polarizing lens. There is a number "850" on the paper label
g) A clear Linhof polarizing lens. There are markings that read: "Pol. Filter" the lens is discolored and there is glue around the edges.
h) A Linhof Polarizing lens instruction book, it is folded in quarters
Brown leather case with 6 Linhof polarizing lenses. Each lens has a black plastic frame and are separated with cardstock in the leather case.
a) A small brown leather case with a snap button
b) An empty plastic polarizing lens frame
c) A blue Linhof polarizing lens. Theres are markings on the tab that read "B12 (3x) Konvers. Filter"
d) A green Linhof polarizing lens. There is a green number "2" on the plastic tab
e) An red Linhof polarizing lens. There is a number "1" on the plastic tab
f) A pale orange Linhof polarizing lens. There is a number "850" on the paper label
g) A clear Linhof polarizing lens. There are markings that read: "Pol. Filter" the lens is discolored and there is glue around the edges.
h) A Linhof Polarizing lens instruction book, it is folded in quarters
Physical Condition
Fair
Material
leather
plastic
metal
glass
Condition Remarks
There are some glue on a few of the lenses. One of them is missing a filter
6 different types of slip in filters, each of them are stored in cardboard boxes with Linhof branding. All of them have black plastic frames on each of them with linhof branding on the plastic tab and the number "70" under the branding.
a) A red Linhof slip-in filter there is a number "1" on the tab.
b) A yellow Linhof slip-in filter there is a number "2" on the plastic tab.
c) An orange Linhof slip-in filter.
d) A clear Linhof slip-in filter. The letters "UV" are on one side of the plastic tab.
e) A metal mesh screen Linhof slip-in filter. In same box with f)
f) A layered metal mesh screen Linhof slip-in filter. There is glue on the edges of the mesh. In the same box as e)
6 different types of slip in filters, each of them are stored in cardboard boxes with Linhof branding. All of them have black plastic frames on each of them with linhof branding on the plastic tab and the number "70" under the branding.
a) A red Linhof slip-in filter there is a number "1" on the tab.
b) A yellow Linhof slip-in filter there is a number "2" on the plastic tab.
c) An orange Linhof slip-in filter.
d) A clear Linhof slip-in filter. The letters "UV" are on one side of the plastic tab.
e) A metal mesh screen Linhof slip-in filter. In same box with f)
f) A layered metal mesh screen Linhof slip-in filter. There is glue on the edges of the mesh. In the same box as e)
Physical Condition
Fair
Material
cardboard
plastic
glass
Condition Remarks
One of them has glue on the lens and the cardboard box is starting to detriorate
A beige Linhof ball socket tripod head. The bottom has a dial that can be turned if you unscrew the hand turnable screw at the side, along with a screw hole to attach a tripod into it. Above the dial are numbers, above that is a screw to unlock the ball joint in order to turn it around. the top of the joint has a flat round base and screw to attach it to something, probably a camera. A thread with a red seal is tied to the side screw.
A beige Linhof ball socket tripod head. The bottom has a dial that can be turned if you unscrew the hand turnable screw at the side, along with a screw hole to attach a tripod into it. Above the dial are numbers, above that is a screw to unlock the ball joint in order to turn it around. the top of the joint has a flat round base and screw to attach it to something, probably a camera. A thread with a red seal is tied to the side screw.
A silver Linhof multifocus finder mask. It has a square cut out in the middle. The front has markings that read "LINHOF - UNIVERSALSUCHER - TECHNIKA 56x72"
A silver Linhof multifocus finder mask. It has a square cut out in the middle. The front has markings that read "LINHOF - UNIVERSALSUCHER - TECHNIKA 56x72"
A light brown Linhof film holder. There is a label on the side that reads "Super Rollex 56 x 72" and a red name tag at the bottom front that reads "MAX PATZELT" at the top front there is a switch with an arrow pointing at the left. At the top there is a lever and a clear plastic circle to show the numbers inside. At the bottom there is a clip to hold the information for some film in this case it is a Kodak EP 120. Plastic tab at side to remove metal sheet.
A light brown Linhof film holder. There is a label on the side that reads "Super Rollex 56 x 72" and a red name tag at the bottom front that reads "MAX PATZELT" at the top front there is a switch with an arrow pointing at the left. At the top there is a lever and a clear plastic circle to show the numbers inside. At the bottom there is a clip to hold the information for some film in this case it is a Kodak EP 120. Plastic tab at side to remove metal sheet.
Physical Condition
Poor
Material
metal
plastic
Condition Remarks
The emblem is missing and the plastic tab appears to be melted
Around Vivitar camera lens, it has a black round frame with a grey glass lens. The markings on the frame read: "Vivitar 77mm Polarizing JAPAN" it is stored in a round clear plastic case .
Around Vivitar camera lens, it has a black round frame with a grey glass lens. The markings on the frame read: "Vivitar 77mm Polarizing JAPAN" it is stored in a round clear plastic case .
A leather camera case imitation leather with handles, long strap. Lined with reddish-brown felt. There is a metal "Nikon" logo on the front. The flap has a lock.
A leather camera case imitation leather with handles, long strap. Lined with reddish-brown felt. There is a metal "Nikon" logo on the front. The flap has a lock.
a) A black leather case for the video camera. It has an adjustable shoulder strap and a latch that you can lock, there is a key attached to the side of the strap with a black string. Inside the case is purple felt with elastic and leather straps along with a name tag.
b) A Carena Variogon Zoomex video camera. It has three dials at the front and a lever at the lens to zoom in. beneath the dials is a trigger to begin filming. Under the handle is a hole with screw ridges to attach a tripod to. At the top there is a dial and a view finder.
c) A black detachable eyecup
d) A Schneider Optik Kreuznach lens cap
a) A black leather case for the video camera. It has an adjustable shoulder strap and a latch that you can lock, there is a key attached to the side of the strap with a black string. Inside the case is purple felt with elastic and leather straps along with a name tag.
b) A Carena Variogon Zoomex video camera. It has three dials at the front and a lever at the lens to zoom in. beneath the dials is a trigger to begin filming. Under the handle is a hole with screw ridges to attach a tripod to. At the top there is a dial and a view finder.
c) A black detachable eyecup
d) A Schneider Optik Kreuznach lens cap
a) A leather hard shell camera case with a strap. There are snap buttons to close and open it. There is a hand turnable screw to securly hold the camera in the case.
b) An Agfa Flexilette camera. It has a dual lens with three dials, at the front with markings: "AGFA COLOR APOTAR 1: 2.8/45" Dial at top to change numbers in window with button there is a window and some dried glue around it, the viewfinder is possibly missing. There are two dials at the bottom. the sides have metal loops to hook a strap.
a) A leather hard shell camera case with a strap. There are snap buttons to close and open it. There is a hand turnable screw to securly hold the camera in the case.
b) An Agfa Flexilette camera. It has a dual lens with three dials, at the front with markings: "AGFA COLOR APOTAR 1: 2.8/45" Dial at top to change numbers in window with button there is a window and some dried glue around it, the viewfinder is possibly missing. There are two dials at the bottom. the sides have metal loops to hook a strap.
Physical Condition
Fair
Material
metal
plastic
glass
leather
Condition Remarks
The leather bag is bent at the front, the lens is dirty
