Thumb groove and Face of upper side-two grooves for fingers on lower side Material-Plastic black Technique- carved, ground and incised (original artifact).
Thumb groove and Face of upper side-two grooves for fingers on lower side Material-Plastic black Technique- carved, ground and incised (original artifact).
A black Nikon MD-4 motor drive, The front has switches and dials. there is a screw at the top to attach it to a camera. The black side handle has a small dial.
A black Nikon MD-4 motor drive, The front has switches and dials. there is a screw at the top to attach it to a camera. The black side handle has a small dial.
One VHS Tape containing footage of "Seekwyakin Family Day". Produced for Alcan and K.C.P. by Storyteller Services Inc. Black VHS tape inside a black plastic case. Brand name '3M'
One VHS Tape containing footage of "Seekwyakin Family Day". Produced for Alcan and K.C.P. by Storyteller Services Inc. Black VHS tape inside a black plastic case. Brand name '3M'
These stone hammers are black, and each has its own shape. (1) 72.91.1 -Stone-age hammer - 18 x 8 x 8 cm. - very crude. (2) 71.91.2 - Mortor-like artifact - 10 cm.high and 9 cm. wide. (3) 71.91.3 - Pestle-like artifact - 26.6 x 6.4 cm.
These stone hammers are black, and each has its own shape. (1) 72.91.1 -Stone-age hammer - 18 x 8 x 8 cm. - very crude. (2) 71.91.2 - Mortor-like artifact - 10 cm.high and 9 cm. wide. (3) 71.91.3 - Pestle-like artifact - 26.6 x 6.4 cm.
Stone hammer is grey. Has a groove throughout the circumference of the center, possibly as a hand gripping point or to wrap a binding component around (rope/twine).
Stone hammer is grey. Has a groove throughout the circumference of the center, possibly as a hand gripping point or to wrap a binding component around (rope/twine).
A view camera with a brown wood frame, red plastic accordion body, and metal parts like its knobs and ridges for adjusting the body. There are markings on a metal piece stuck on the wooden end that read: "REMBRANDT PORTRAIT CAMERA MODEL II BURKE & JAMES CHICAGO ILL., U.S.A.". the lens is missing. It was used in Max's Photo Studio Ltd.
A view camera with a brown wood frame, red plastic accordion body, and metal parts like its knobs and ridges for adjusting the body. There are markings on a metal piece stuck on the wooden end that read: "REMBRANDT PORTRAIT CAMERA MODEL II BURKE & JAMES CHICAGO ILL., U.S.A.". the lens is missing. It was used in Max's Photo Studio Ltd.
A view camera. At the back there is information about the camera XXX"EASTMAN VIEW CAMERA NO.33A MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y." Above it is a square cut out, most likely a view finder. At one side there is a metal dial to adjust the bellows lens. above it is a metal hand turnable screw. At the other side there is a small metal dial. At the front there is a wooden part that can be adjusted along with a piece of glass within a frame right beind it. XXXAt bottom there is a screw hole to put a tripod through it. And a hand turnable screw at side. Latch at top to allow bellows lens to extend.
A view camera. At the back there is information about the camera XXX"EASTMAN VIEW CAMERA NO.33A MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y." Above it is a square cut out, most likely a view finder. At one side there is a metal dial to adjust the bellows lens. above it is a metal hand turnable screw. At the other side there is a small metal dial. At the front there is a wooden part that can be adjusted along with a piece of glass within a frame right beind it. XXXAt bottom there is a screw hole to put a tripod through it. And a hand turnable screw at side. Latch at top to allow bellows lens to extend.
K& E Survey Level: Used on Aluminum Co. surveys in early years of construction. Mr. Le Franc came to Kitimat in 1954. He purchased this item from the company when the equipment had been sold off. Alcan had over 300 people on the survey.
Crane Operator License: Aluminum Company of Canada Ltd. Crane operators badge.
K& E Survey Level: Used on Aluminum Co. surveys in early years of construction. Mr. Le Franc came to Kitimat in 1954. He purchased this item from the company when the equipment had been sold off. Alcan had over 300 people on the survey.
Crane Operator License: Aluminum Company of Canada Ltd. Crane operators badge.