a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A camera lens with markings that read: "Mamiya" it has buttons on the side that can attach it to the lens
b) A seiko lens with a Mamiya RB67 lens hood. The lens has buttons, dials and numbers on the sides, the lens hood is made of rubber and can be extended.
c) A Mamiya professional camera body it has a dial and lever at one side and another dial in the other, the bottom has screw groves to attach it to a tripod
d) A Mamiya RB67 view finder is attached at the top. It is a square shape with the model at the front edge, it can slide to the left to remove it.
e) A Mamiya roll film back with a lever at the top with the number "120 S"
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a square metal label holder at the back, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-70mm lens. It is a long lens with numbers and three large dials to adjust focus and zoom.
c) A Vivitar 72mm SKYLIGHT lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black large lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside.
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap with a grey metal frame.
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a square metal label holder at the back, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-70mm lens. It is a long lens with numbers and three large dials to adjust focus and zoom.
c) A Vivitar 72mm SKYLIGHT lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black large lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside.
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap with a grey metal frame.
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a glass display at the back for the ASA/ISO, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-105mm lens. It is a long lens with numbers and two dials. the Lens can be extended. It has colored numbers at the side
c) A B+W 52 E lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black Nikon HK-11 lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside. it has black felt inside
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap
a) A Nikon F3 camera. it has dials and levers at the top, buttons at the front, screw grooves at the bottom to attach it to a tripod, a glass display at the back for the ASA/ISO, a round viewfinder with a rubber rim. the back can be opened to put in film.
b) A Zoom-NIKKOR 35-105mm lens. It is a long lens with numbers and two dials. the Lens can be extended. It has colored numbers at the side
c) A B+W 52 E lens filter. This filter is screwed onto the Nikkor zoom lens. It has a black metal frame with a glass lens.
d) A black Nikon HK-11 lens hood, it has a small cylinder screw that can be tightened onto a lens with the rubber strips inside. it has black felt inside
e) A yellow and black nylon Nikon strap. the strap can be adjusted and it has leather staps at the end to attach onto the camera.
f) A black Nikon lens cap
a) A Mamiya Professional Camera. It has no lens. The top has a glass view finder. One side has a dial, the other side has a lever with a dial, there is a chart with numbers above the dial. Underneath, has Mamiya branding and a hole with screw grooves to attach a tripod to it. The front has a hole to attach a lens or extension tube. The back can be detached or reattached with the two locks.
b) A Mamiya plastic back panel with "Mamiya" marked at the front.
c) A Mamiya lens cap it has ridges on the side with a "Mamiya" marking at the front
a) A Mamiya Professional Camera. It has no lens. The top has a glass view finder. One side has a dial, the other side has a lever with a dial, there is a chart with numbers above the dial. Underneath, has Mamiya branding and a hole with screw grooves to attach a tripod to it. The front has a hole to attach a lens or extension tube. The back can be detached or reattached with the two locks.
b) A Mamiya plastic back panel with "Mamiya" marked at the front.
c) A Mamiya lens cap it has ridges on the side with a "Mamiya" marking at the front
A Linhof large format camera. There is a view finder at side with rubber eye cup. A hand screw at the top. There are dials, buttons, and levers around the camera. At one side there is a door that reveals a bellows lens when opened. A tripod mount at the bottom. There is a leather strap attached on one side.
A Linhof large format camera. There is a view finder at side with rubber eye cup. A hand screw at the top. There are dials, buttons, and levers around the camera. At one side there is a door that reveals a bellows lens when opened. A tripod mount at the bottom. There is a leather strap attached on one side.
a) A leather hard shell camera case with a strap. There are snap buttons to close and open it. There is a hand turnable screw to securly hold the camera in the case.
b) An Agfa Flexilette camera. It has a dual lens with three dials, at the front with markings: "AGFA COLOR APOTAR 1: 2.8/45" Dial at top to change numbers in window with button there is a window and some dried glue around it, the viewfinder is possibly missing. There are two dials at the bottom. the sides have metal loops to hook a strap.
a) A leather hard shell camera case with a strap. There are snap buttons to close and open it. There is a hand turnable screw to securly hold the camera in the case.
b) An Agfa Flexilette camera. It has a dual lens with three dials, at the front with markings: "AGFA COLOR APOTAR 1: 2.8/45" Dial at top to change numbers in window with button there is a window and some dried glue around it, the viewfinder is possibly missing. There are two dials at the bottom. the sides have metal loops to hook a strap.
Physical Condition
Fair
Material
metal
plastic
glass
leather
Condition Remarks
The leather bag is bent at the front, the lens is dirty
Front has 3 lenses with brand information "Marksman MADE IN CAMERA FOR BERNARD MARKS & CO." viewfinder, lever and dial at side. At top is a Leather strap, lever for "TIME (arrow) SNAP" and a viewfinder. The back can be opened to reveal the inside of the camera.
Front has 3 lenses with brand information "Marksman MADE IN CAMERA FOR BERNARD MARKS & CO." viewfinder, lever and dial at side. At top is a Leather strap, lever for "TIME (arrow) SNAP" and a viewfinder. The back can be opened to reveal the inside of the camera.
a) A dark brown Zeiss Ikon camera case. The camera case can come apart and be reatached. The bottom has a hand turnable screw to snugly attach a camera onto it.
b) A Zeiss Ikon camera. At the front there is a lens, markings read "Carl Zeiss 2,8/50 3458458" "Contaflex SYNCHRO-COMPUR" there are three dials and a flash. Two dials at the top with numbers. The back has a view finder and film compartment. The bottom has two hand turnable screws and a screw hole for a tripod. At either side there is a metal loop for a camera strap.
c) A rubber Zeiss Ikon rubber lens hood the sides have markings "1109 S27 Zeis Ikon AG Germany"
a) A dark brown Zeiss Ikon camera case. The camera case can come apart and be reatached. The bottom has a hand turnable screw to snugly attach a camera onto it.
b) A Zeiss Ikon camera. At the front there is a lens, markings read "Carl Zeiss 2,8/50 3458458" "Contaflex SYNCHRO-COMPUR" there are three dials and a flash. Two dials at the top with numbers. The back has a view finder and film compartment. The bottom has two hand turnable screws and a screw hole for a tripod. At either side there is a metal loop for a camera strap.
c) A rubber Zeiss Ikon rubber lens hood the sides have markings "1109 S27 Zeis Ikon AG Germany"
